Effects of hole injection layer thickness on the luminescent properties of white organic light-emitting diodes
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2524 | en_US |
dc.citation.issue |
5 | en_US |
dc.citation.spage |
2522 | en_US |
dc.citation.volume |
253 | en_US |
dc.citation.woscount |
5 | |
dc.contributor.author |
Li, Jian-Feng | en_US |
dc.contributor.author |
Chen, Shih-Fang | en_US |
dc.contributor.author |
Su, Shui-Hsiang | en_US |
dc.contributor.author |
Hwang, Kao-Shing | en_US |
dc.contributor.author |
Yokoyama, Meiso | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:15:11Z | |
dc.date.available |
2014-12-08T15:15:11Z | |
dc.date.issued |
2006-12-30 | en_US |
dc.description.abstract |
This work investigates how the thickness of the hole injection layer (HIL) influences the luminescent characteristics of white organic light-emitting diodes (WOLED). Experimental results indicate that inserting a thin HIL (< 200 angstrom) into a WOLED without an HIL reduces the brightness and clearly changes the chromaticity because the surface of the 4,4',4"-tris{N,-(3-methylphenyl)-N-phenylamino}-triphenylamine) (m-MTDATA) film is extremely rough. In contrast, a dense film structure and the fine surface morphology of m-MTDATA of moderate thickness (350-650 angstrom) provides a uniform conducting path on which holes cross the indium tin oxide (ITO)/HIL interface, improving luminescent performance, associated with the relatively stable purity of the color of the emission, with Commission Internationale 1'Eclairage (CIE) coordinates of (x = 0.40, y = 0.40). However, inserting a thick HIL (> 650 angstrom) reduces the luminescent performance and causes red-shift, because the holes and electrons in the effective emissive confinement region become less optimally balanced. Moreover, optimizing the device structure enables a bright WOLED with CIE coordinates of (x = 0.34, y = 0.33) to reach a luminance of 7685 cd/m(2) at a current density of 100 mA/cm(2), with a maximum luminous efficiency of 1.72 Im/W at 5.5 V. (c) 2006 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.apsusc.2006.05.019 | en_US |
dc.identifier.issn |
0169-4332 | en_US |
dc.identifier.journal |
APPLIED SURFACE SCIENCE | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.apsusc.2006.05.019 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/11416 | |
dc.identifier.wosnumber |
WOS:000243244300029 | |
dc.language.iso |
en_US | en_US |
dc.subject |
hole injection layer | en_US |
dc.subject |
white organic light-emitting diodes | en_US |
dc.subject |
surface morphology | en_US |
dc.subject |
luminescent | en_US |
dc.title |
Effects of hole injection layer thickness on the luminescent properties of white organic light-emitting diodes | en_US |
dc.type |
Article | en_US |
檔案
- 000243244300029.pdf (463.4 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Li, J.-F., Chen, S.-F., Su, S.-H., Hwang, K.-S., & Yokoyama, M. (2006). Effects of hole injection layer thickness on the luminescent properties of white organic light-emitting diodes. APPLIED SURFACE SCIENCE, 253(5), 2522–2524. https://doi.org/10.1016/j.apsusc.2006.05.019
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11416