Design techniques for high-speed multirate multistage FIR digital filters
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
721 | en_US |
dc.citation.issue |
10 | en_US |
dc.citation.spage |
699 | en_US |
dc.citation.volume |
93 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Lin, M. -C. | en_US |
dc.contributor.author |
Chen, H. -Y. | en_US |
dc.contributor.author |
Jou, S. -J. | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:15:39Z | |
dc.date.available |
2014-12-08T15:15:39Z | |
dc.date.issued |
2006-10-01 | en_US |
dc.description.abstract |
This paper presents architecture design techniques for implementing both single-rate and multirate high-speed finite impulse response (FIR) digital filters, with emphasis on the multirate multistage interpolated FIR (IFIR) digital filters. Well-known techniques to achieve high-speed and low-power applications for the single-rate digital FIR architecture are summarized, followed by the introduction of variable filter order selection, optimal filter decomposition, memory-saving and mirror symmetric filter pairs techniques which offer further gains in both performance and complexity reduction for the multirate multistage digital FIR architecture. A filter design example with TSMC 0.25 mu m standard cell for 64-QAM baseband demodulator shows that the area is reduced by 39% for low-complexity application. Moreover, for high-speed application, the chip can operate at 714 MHz. Finally, a designed decimator which is used in the CDMA cellular shows that the area is reduced by 70% as compared with conventional approach. | en_US |
dc.identifier.doi |
10.1080/00207210600810838 | en_US |
dc.identifier.issn |
0020-7217 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF ELECTRONICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1080/00207210600810838 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/11688 | |
dc.identifier.wosnumber |
WOS:000240873400006 | |
dc.language.iso |
en_US | en_US |
dc.subject |
FIR digital filter | en_US |
dc.subject |
multirate | en_US |
dc.subject |
interpolated FIR filter | en_US |
dc.title |
Design techniques for high-speed multirate multistage FIR digital filters | en_US |
dc.type |
Article | en_US |
檔案
- 000240873400006.pdf (568.4 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lin, M. C., Chen, H. Y., & Jou, S. J. (2006). Design techniques for high-speed multirate multistage FIR digital filters. INTERNATIONAL JOURNAL OF ELECTRONICS, 93(10), 699–721. https://doi.org/10.1080/00207210600810838
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11688