S-parameters-based high speed signal characterization of Al and Cu interconnect on low-K hydrogen silsesquioxane-Si substrate
Simple item page Statistics| Field | Value | Language |
|---|---|---|
dc.citation.epage |
265 | en_US |
dc.citation.spage |
262 | en_US |
dc.contributor.author |
Ho, Chia-Cheng | en_US |
dc.contributor.author |
Chiou, Bi-Shiou | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:16:11Z | |
dc.date.available |
2014-12-08T15:16:11Z | |
dc.date.issued |
2007 | en_US |
dc.description.abstract |
In this study, hydrogen silsesquioxane (HSQ) thin films are employed as the intermetal dielectric, and the high frequency characteristics of Al-HSQ and Cu/Ta-HSQ system are investigated and compared with those of Al-SiO2 system. The S-parameters of the interconnect are measured for insertion loss and crosstalk noise. The interconnect transmission parameters are extracted from the S-parameters. A figure of merit (FOM) is employed to evaluate the characteristics of the interconnect system at high frequencies (100MHz similar to 20GHz). It is found that the insertion losses are 2.01dB/mm, and 1.50dB/mm, 2.73dB/mm, 2.44dB/mm, and 1.66dB/mm at 10GHz, and 2.16dB/mm, 1.64dB/mm, 3.08dB/mm, 2.62dB/mm, and 1.82dB/mm at 20GHz for Al-SiO2, Al-HSQ, Al-HSQ (02 plasma), Cu/Ta-HSQ, and Cu/Ta-HSQ (NH3 plasma), respectively. The Al/HSQ system has better performance than the other ones do from 100MHz to 20GHz. The high frequency characteristics of Al and Cu interconnect with HSQ dielectrics are discussed. | en_US |
dc.identifier.isbn |
978-1-4244-1636-3 | en_US |
dc.identifier.journal |
2007 INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE, PROCEEDINGS OF TECHNICAL PAPERS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/12023 | |
dc.identifier.wosnumber |
WOS:000253090500058 | |
dc.language.iso |
en_US | en_US |
dc.title |
S-parameters-based high speed signal characterization of Al and Cu interconnect on low-K hydrogen silsesquioxane-Si substrate | en_US |
dc.type |
Proceedings Paper | en_US |
Files
No files are attached to this item.
Collections: Conferences Paper
Cite this item
Ho, C.-C., & Chiou, B.-S. (2007). S-parameters-based high speed signal characterization of Al and Cu interconnect on low-K hydrogen silsesquioxane-Si substrate. 2007 INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE, PROCEEDINGS OF TECHNICAL PAPERS, 262–265. https://ir.lib.nycu.edu.tw/handle/11536/12023
Citation generated in APA 7th edition style; please check it before use.
Share
Permanent link: https://ir.lib.nycu.edu.tw/handle/11536/12023