Formation of omega and Ti2Ni phases in a residual Ti-Ni-Ti multilayer between stainless steel and zirconia after bonding at 1173K
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
619 | en_US |
dc.citation.issue |
10 | en_US |
dc.citation.spage |
609 | en_US |
dc.citation.volume |
94 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Wei, Shen-Hung | en_US |
dc.contributor.author |
Lin, Chien-Cheng | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2015-07-21T11:20:28Z | |
dc.date.available |
2015-07-21T11:20:28Z | |
dc.date.issued |
2014-10-03 | en_US |
dc.description.abstract |
Stainless steel (316L) and 8mol pct Y2O3-stabilized zirconia (8Y-ZrO2) were bonded using a Ti-Ni-Ti multilayer at 1173K (900 degrees C) for 1h. Cross-sectional transmission electron microscopy specimens were prepared by an innovative focused ion beam plus lift-out technique. In addition to acicular alpha-Ti, the dissolution of Fe, Cr, and Ni diffusing outwards from 316L into beta-Ti led to the precipitation of the omega (omega) phase with different variants in the residual Ti foil between 316L and Ni. The omega-phase was not found in the residual Ti foil between Ni and 8Y-ZrO2, while Ti2Ni precipitates were precipitated in some alpha-Ti grains owing to the exclusion of Ni from the beta-Ti. | en_US |
dc.identifier.doi |
10.1080/09500839.2014.951705 | en_US |
dc.identifier.issn |
0950-0839 | en_US |
dc.identifier.journal |
PHILOSOPHICAL MAGAZINE LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1080/09500839.2014.951705 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/124286 | |
dc.identifier.wosnumber |
WOS:000348938400001 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
transmission electron microscopy | en_US |
dc.subject |
omega phase | en_US |
dc.subject |
titanium | en_US |
dc.subject |
bonding | en_US |
dc.subject |
stainless steels | en_US |
dc.subject |
interfaces | en_US |
dc.title |
Formation of omega and Ti2Ni phases in a residual Ti-Ni-Ti multilayer between stainless steel and zirconia after bonding at 1173K | en_US |
dc.type |
Article | en_US |
檔案
- 000348938400001.pdf (396.3 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Wei, S.-H., & Lin, C.-C. (2014). Formation of omega and Ti2Ni phases in a residual Ti-Ni-Ti multilayer between stainless steel and zirconia after bonding at 1173K. PHILOSOPHICAL MAGAZINE LETTERS, 94(10), 609–619. https://doi.org/10.1080/09500839.2014.951705
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124286