Machine-Learning-Based Hotspot Detection Using Topological Classification and Critical Feature Extraction
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
470 | en_US |
dc.citation.spage |
460 | en_US |
dc.citation.volume |
34 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Yu, Yen-Ting | en_US |
dc.contributor.author |
Lin, Geng-He | en_US |
dc.contributor.author |
Jiang, Iris Hui-Ru | en_US |
dc.contributor.author |
Chiang, Charles | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2015-07-21T08:29:41Z | |
dc.date.available |
2015-07-21T08:29:41Z | |
dc.date.issued |
2015-03-01 | en_US |
dc.description.abstract |
Because of the widening sub-wavelength lithography gap in advanced fabrication technology, lithography hotspot detection has become an essential task in design for manufacturability. Unlike current state-of-the-art works, which unite pattern matching and machine-learning engines, we fully exploit the strengths of machine learning using novel techniques. By combing topological classification and critical feature extraction, our hotspot detection framework achieves very high accuracy. Furthermore, to speed-up the evaluation, we verify only possible layout clips instead of full-layout scanning. We utilize feedback learning and present redundant clip removal to reduce the false alarm. Experimental results show that the proposed framework is very accurate and demonstrates a rapid training convergence. Moreover, our framework outperforms the 2012 CAD contest at International Conference on Computer-Aided Design (ICCAD) winner on accuracy and false alarm. | en_US |
dc.identifier.doi |
10.1109/TCAD.2014.2387858 | en_US |
dc.identifier.issn |
0278-0070 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCAD.2014.2387858 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/124532 | |
dc.identifier.wosnumber |
WOS:000351764500012 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Design for manufacturability | en_US |
dc.subject |
fuzzy pattern matching | en_US |
dc.subject |
hotspot detection | en_US |
dc.subject |
lithography hotspot | en_US |
dc.subject |
machine learning | en_US |
dc.subject |
support vector machine (SVM) | en_US |
dc.title |
Machine-Learning-Based Hotspot Detection Using Topological Classification and Critical Feature Extraction | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Yu, Y.-T., Lin, G.-H., Jiang, I. H.-R., & Chiang, C. (2015). Machine-Learning-Based Hotspot Detection Using Topological Classification and Critical Feature Extraction. IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, 34, 460–470. https://doi.org/10.1109/TCAD.2014.2387858
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124532