Design Optimization of 16-nm Bulk FinFET Technology via Geometric Programming
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Su, Ping-Hsun | en_US |
dc.contributor.author |
Li, Yiming | en_US |
dc.contributor.department |
傳播研究所 | zh_TW |
dc.contributor.department |
Institute of Communication Studies | en_US |
dc.date.accessioned |
2015-07-21T08:31:14Z | |
dc.date.available |
2015-07-21T08:31:14Z | |
dc.date.issued |
2014-01-01 | en_US |
dc.description.abstract |
Design rule is an important interface between design and manufacturing. It becomes more complex as the process advances to 16-nm and beyond. Current approaches to generate design rules are empirical shrink and lithographic simulation. However, it is time-consuming and costly to revise design rules for performance boost and yield improvement after design rules are frozen. Early performance gains in early design rule development without cost increase and yield loss will benefit semiconductor industry. In this work, we for the first time consider 16-nm bulk FinFET standard cell performance, yield, area, and layout style simultaneously to optimize design rules to meet ITRS by using geometric programming. Optical proximity correction, and electromagnetic field and circuit simulations are performed for objective function evaluation. The result achieves more than 100%-delay and 50%-yield improvement without area change by this systematic and statistical approach. | en_US |
dc.identifier.isbn |
978-1-4799-5433-9 | en_US |
dc.identifier.issn |
en_US | |
dc.identifier.journal |
2014 INTERNATIONAL WORKSHOP ON COMPUTATIONAL ELECTRONICS (IWCE) | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/124932 | |
dc.identifier.wosnumber |
WOS:000345736700071 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
design rule | en_US |
dc.subject |
area | en_US |
dc.subject |
power | en_US |
dc.subject |
performance | en_US |
dc.subject |
variability | en_US |
dc.subject |
standard cell | en_US |
dc.subject |
optimization | en_US |
dc.subject |
geometry programming | en_US |
dc.subject |
bulk FinFET | en_US |
dc.title |
Design Optimization of 16-nm Bulk FinFET Technology via Geometric Programming | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Su, P.-H., & Li, Y. (2014). Design Optimization of 16-nm Bulk FinFET Technology via Geometric Programming. 2014 INTERNATIONAL WORKSHOP ON COMPUTATIONAL ELECTRONICS (IWCE). https://ir.lib.nycu.edu.tw/handle/11536/124932
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124932