Optimisation of the GTA welding process using the Taguchi method and a neural network
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
126 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
120 | en_US |
dc.citation.volume |
11 | en_US |
dc.citation.woscount |
12 | |
dc.contributor.author |
Lin, HL | en_US |
dc.contributor.author |
Chou, CP | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:17:30Z | |
dc.date.available |
2014-12-08T15:17:30Z | |
dc.date.issued |
2006-02-01 | en_US |
dc.description.abstract |
There are many parameters that affect gas tungsten arc (GTA) welding process quality. Conventionally, the Taguchi method has been widely used in engineering; however, with this method the desired results can only be obtained with the use of very discrete control factors, thus leading to uncertainty about the real optimum. In this study, the Taguchi method was used for the initial optimisation of the GTA welding process parameters. A neural network was then used to construct the relationships between the welding process parameters and weld pool geometry of each weldment. The optimal parameters of the GTA welding process were determined by simulating significant process parameters obtained by the Taguchi method. Experimental results are provided to illustrate the proposed approach. | en_US |
dc.identifier.doi |
10.1179/174329306X84328 | en_US |
dc.identifier.issn |
1362-1718 | en_US |
dc.identifier.journal |
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1179/174329306X84328 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/12684 | |
dc.identifier.wosnumber |
WOS:000236940600015 | |
dc.language.iso |
en_US | en_US |
dc.subject |
gas tungsten arc welding | en_US |
dc.subject |
neural networks | en_US |
dc.subject |
Taguchi method | en_US |
dc.title |
Optimisation of the GTA welding process using the Taguchi method and a neural network | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Lin, H., & Chou, C. (2006). Optimisation of the GTA welding process using the Taguchi method and a neural network. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 11(1), 120–126. https://doi.org/10.1179/174329306X84328
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/12684