The influence of serration on a shaving cutter with a pre-designed relief portion
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
966 | en_US |
dc.citation.spage |
961 | en_US |
dc.citation.volume |
505-507 | en_US |
dc.contributor.author |
Chang, SL | en_US |
dc.contributor.author |
Wu, UD | en_US |
dc.contributor.author |
Hsieh, JK | en_US |
dc.contributor.author |
Tseng, CH | en_US |
dc.contributor.author |
Cheng, SD | en_US |
dc.contributor.author |
Chang, KR | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:17:37Z | |
dc.date.available |
2014-12-08T15:17:37Z | |
dc.date.issued |
2006 | en_US |
dc.description.abstract |
In this paper, a shaving cutter with serration and a pre-designed relief portion manufactured by a hob cutter was designed. Due to the non-conventional manufacturing process, standard manufacturing problems were avoided and the production efficiency was enhanced as was the stiffness of the shaving cutter. Two solid models of the shaving cutter, one with the novel relief portion and the other a relief hole, were set up for stress analysis using the finite element method. The models confirmed that the shaving cutter with the novel relief portion had a higher stiffness compared to that with a relief hole in the presence of serration. | en_US |
dc.identifier.isbn |
0-87849-990-3 | en_US |
dc.identifier.issn |
0255-5476 | en_US |
dc.identifier.journal |
PROGRESS ON ADVANCED MANUFACTURE FOR MICRO/NANO TECHNOLOGY 2005, PT 1 AND 2 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/12780 | |
dc.identifier.wosnumber |
WOS:000235279200161 | |
dc.language.iso |
en_US | en_US |
dc.subject |
shaving cutter | en_US |
dc.subject |
serration | en_US |
dc.subject |
hob cutter | en_US |
dc.subject |
finite element method | en_US |
dc.title |
The influence of serration on a shaving cutter with a pre-designed relief portion | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Chang, S., Wu, U., Hsieh, J., Tseng, C., Cheng, S., & Chang, K. (2006). The influence of serration on a shaving cutter with a pre-designed relief portion. PROGRESS ON ADVANCED MANUFACTURE FOR MICRO/NANO TECHNOLOGY 2005, PT 1 AND 2, 505-507, 961–966. https://ir.lib.nycu.edu.tw/handle/11536/12780
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/12780