High-Performance and Stable Gel-State Dye-Sensitized Solar Cells Using Anodic TiO2 Nanotube Arrays and Polymer-Based Gel Electrolytes
Simple item page Statistics| Field | Value | Language |
|---|---|---|
dc.citation.epage |
12739 | en_US |
dc.citation.issue |
23 | en_US |
dc.citation.spage |
12731 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Seidalilir, Zahra | en_US |
dc.contributor.author |
Malekfar, Rasoul | en_US |
dc.contributor.author |
Wu, Hui-Ping | en_US |
dc.contributor.author |
Shiu, Jia-Wei | en_US |
dc.contributor.author |
Diau, Eric Wei-Guang | en_US |
dc.contributor.department |
應用化學系 | zh_TW |
dc.contributor.department |
應用化學系分子科學碩博班 | zh_TW |
dc.contributor.department |
Department of Applied Chemistry | en_US |
dc.contributor.department |
Institute of Molecular science | en_US |
dc.date.accessioned |
2015-12-02T02:59:11Z | |
dc.date.available |
2015-12-02T02:59:11Z | |
dc.date.issued |
2015-06-17 | en_US |
dc.description.abstract |
Highly ordered and vertically oriented TiO2 nanotube (NT) arrays were synthesized with potentiostatic anodization of Ti foil and applied to fabricate gel-state dye-sensitized solar cells (DSSCs). The open structure of the TiO2 NT facilitates the infiltration of the gel-state electrolyte; their one-dimensional structural feature provides effective charge transport. TiO2 NTs of length L = 15-35 mu m were produced on anodization for periods of t = 5-15 h at a constant voltage of 60 V, and sensitized with N719 for photovoltaic characterization. A commercially available copolymer, poly(methyl methacrylate-co-ethyl acrylate) (PMMA-EA) served as a gelling agent to prepare a polymer-gel electrolyte (PGE) for DSSC applications. The PGE as prepared exhibited a maximum conductivity of 4.58 mS cm(-1) with PMMA-EA (7 wt %). The phase transition temperature (T-p) of the PGE containing PMMA-EA at varied concentrations was determined on the basis of the viscosities measured at varied temperatures. T-p increased with increasing concentration of PMMA-EA. An NT-DSSC with L = 30 mu m assembled using a PGE containing PMMA-EA (7 wt %) exhibited an overall power conversion efficiency (PCE) of 6.9%, which is comparable with that of a corresponding liquid-type device, PCE = 7.1%. Moreover, the gel-state NT-DSSC exhibited excellent thermal and light-soaking enduring stability: the best device retained similar to 90% of its initial efficiency after 1000 h under 1 sun of illumination at 50 degrees C, whereas its liquid-state counterpart decayed appreciably after light soaking for 500 h. | en_US |
dc.identifier.doi |
10.1021/acsami.5b01519 | en_US |
dc.identifier.issn |
1944-8244 | en_US |
dc.identifier.journal |
ACS APPLIED MATERIALS & INTERFACES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1021/acsami.5b01519 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/127887 | |
dc.identifier.wosnumber |
WOS:000356753500048 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
anodization | en_US |
dc.subject |
DSSC | en_US |
dc.subject |
polymer-gel electrolyte | en_US |
dc.subject |
PMMA-EA | en_US |
dc.subject |
TiO2 nanotubes | en_US |
dc.title |
High-Performance and Stable Gel-State Dye-Sensitized Solar Cells Using Anodic TiO2 Nanotube Arrays and Polymer-Based Gel Electrolytes | en_US |
dc.type |
Article | en_US |
Files
No files are attached to this item.
Collections: Articles
Cite this item
Seidalilir, Z., Malekfar, R., Wu, H.-P., Shiu, J.-W., & Diau, E. W.-G. (2015). High-Performance and Stable Gel-State Dye-Sensitized Solar Cells Using Anodic TiO2 Nanotube Arrays and Polymer-Based Gel Electrolytes. ACS APPLIED MATERIALS & INTERFACES, 12731–12739. https://doi.org/10.1021/acsami.5b01519
Citation generated in APA 7th edition style; please check it before use.
Share
Permanent link: https://ir.lib.nycu.edu.tw/handle/11536/127887