Wet-milled anatase titanium oxide nanoparticles as a buffer layer for air-stable bulk heterojunction solar cells
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1024 | en_US |
dc.citation.spage |
1017 | en_US |
dc.citation.volume |
23 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Huang, Jen-Hsien | en_US |
dc.contributor.author |
Ibrahem, Mohammed Aziz | en_US |
dc.contributor.author |
Chu, Chih-Wei | en_US |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2015-12-02T02:59:18Z | |
dc.date.available |
2015-12-02T02:59:18Z | |
dc.date.issued |
2015-08-01 | en_US |
dc.description.abstract |
In this study, an air-stable bulk heterojunction organic solar cell demonstrated by utilization of titanium oxide (TiO2) nanoparticles as a hole blocking layer was prepared through high-energy grinding method. The large clumps of the anatase TiO2 underwent deaggregation to form a stable dispersed solution during the grinding process. The resultant suspension can form a uniform and smooth TiO2 film through spin coating on various substrates. Because of substantial oxygen and water protection effect of TiO2 thin film, the bulk heterojunction solar cells exhibit a significant long-term stability. It is also found that the cell performance can be promoted dramatically after ultraviolet activation. The mechanism responsible for the enhanced cell efficiency was also investigated. This solution-based method does not require surfactants, thus preserving the intrinsic electronic and optical properties of TiO2 that makes these proposed buffer layers quite attractive for next-generation flexible devices appealing high conductivity and transparency. Copyright (c) 2014 John Wiley & Sons, Ltd. | en_US |
dc.identifier.doi |
10.1002/pip.2522 | en_US |
dc.identifier.issn |
1062-7995 | en_US |
dc.identifier.journal |
PROGRESS IN PHOTOVOLTAICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1002/pip.2522 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/128019 | |
dc.identifier.wosnumber |
WOS:000357792700008 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
solar cells | en_US |
dc.subject |
solution process | en_US |
dc.subject |
TiO2 | en_US |
dc.subject |
electron | en_US |
dc.subject |
buffer layer | en_US |
dc.subject |
stability | en_US |
dc.title |
Wet-milled anatase titanium oxide nanoparticles as a buffer layer for air-stable bulk heterojunction solar cells | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Huang, J.-H., Ibrahem, M. A., & Chu, C.-W. (2015). Wet-milled anatase titanium oxide nanoparticles as a buffer layer for air-stable bulk heterojunction solar cells. PROGRESS IN PHOTOVOLTAICS, 23, 1017–1024. https://doi.org/10.1002/pip.2522
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/128019