Reactant Minimization for Sample Preparation on Microfluidic Biochips With Various Mixing Models
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1927 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
1918 | en_US |
dc.citation.volume |
34 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Liu, Chia-Hung | en_US |
dc.contributor.author |
Shen, Kuo-Cheng | en_US |
dc.contributor.author |
Huang, Juinn-Dar | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2016-03-28T00:04:08Z | |
dc.date.available |
2016-03-28T00:04:08Z | |
dc.date.issued |
2015-12-01 | en_US |
dc.description.abstract |
Sample preparation is one of the essential processes for most on-chip biochemical applications. During this process, raw reactants are diluted to specific concentration values. Current sample preparation algorithms are generally created for digital microfluidic biochips with the (1:1) mixing model. For other biochip architectures supporting multiple mixing models, such as flow-based microfluidic biochips, there is still no dedicated solution yet. Hence, in this paper, we propose the first sample preparation method dedicated to microfluidic biochips with various mixing models, named tree pruning and grafting (TPG) algorithm. It starts with a dilution tree created by regarding the (1: 1) mixing model only, and then applies TPG through a bottom-up dynamic programming strategy to obtain a solution with minimal reactant consumption. Experimental results show that our algorithm can save reactant amount by up to 69% against the well-known bit-scanning method on a biochip with a four-segment mixer. Even compared with the state-of-the-art reactant minimization algorithm, it still achieves a reactant reduction of 37%. Therefore, it is convincing that the TPG algorithm is a promising sample preparation solution for biochip architectures that support various mixing models. | en_US |
dc.identifier.doi |
10.1109/TCAD.2015.2440312 | en_US |
dc.identifier.issn |
0278-0070 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCAD.2015.2440312 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/129352 | |
dc.identifier.wosnumber |
WOS:000365222400003 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Biochip | en_US |
dc.subject |
dilution | en_US |
dc.subject |
flow-based microfluidic biochip (FMFB) | en_US |
dc.subject |
mixing model | en_US |
dc.subject |
reactant minimization | en_US |
dc.subject |
sample preparation | en_US |
dc.title |
Reactant Minimization for Sample Preparation on Microfluidic Biochips With Various Mixing Models | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Liu, C.-H., Shen, K.-C., & Huang, J.-D. (2015). Reactant Minimization for Sample Preparation on Microfluidic Biochips With Various Mixing Models. IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, 34(12), 1918–1927. https://doi.org/10.1109/TCAD.2015.2440312
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/129352