Design of an FMCW radar baseband signal processing system for automotive application
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Lin, Jau-Jr | en_US |
dc.contributor.author |
Li, Yuan-Ping | en_US |
dc.contributor.author |
Hsu, Wei-Chiang | en_US |
dc.contributor.author |
Lee, Ta-Sung | en_US |
dc.contributor.department |
電機資訊學士班 | zh_TW |
dc.contributor.department |
Undergraduate Honors Program of Electrical Engineering and Computer Science | en_US |
dc.date.accessioned |
2016-03-28T00:04:25Z | |
dc.date.available |
2016-03-28T00:04:25Z | |
dc.date.issued |
2016-01-18 | en_US |
dc.description.abstract |
For a typical FMCW automotive radar system, a new design of baseband signal processing architecture and algorithms is proposed to overcome the ghost targets and overlapping problems in the multi-target detection scenario. To satisfy the short measurement time constraint without increasing the RF front-end loading, a three-segment waveform with different slopes is utilized. By introducing a new pairing mechanism and a spatial filter design algorithm, the proposed detection architecture not only provides high accuracy and reliability, but also requires low pairing time and computational loading. This proposed baseband signal processing architecture and algorithms balance the performance and complexity, and are suitable to be implemented in a real automotive radar system. Field measurement results demonstrate that the proposed automotive radar signal processing system can perform well in a realistic application scenario. | en_US |
dc.identifier.doi |
10.1186/s40064-015-1583-5 | en_US |
dc.identifier.issn |
2193-1801 | en_US |
dc.identifier.journal |
SPRINGERPLUS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1186/s40064-015-1583-5 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/129666 | |
dc.identifier.wosnumber |
WOS:000368876200001 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Automotive radar | en_US |
dc.subject |
Frequency modulated continuous wave (FMCW) | en_US |
dc.subject |
Multi-target detection | en_US |
dc.subject |
Radar waveform | en_US |
dc.subject |
Antenna array | en_US |
dc.title |
Design of an FMCW radar baseband signal processing system for automotive application | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Lin, J.-J., Li, Y.-P., Hsu, W.-C., & Lee, T.-S. (2016). Design of an FMCW radar baseband signal processing system for automotive application. SPRINGERPLUS. https://doi.org/10.1186/s40064-015-1583-5
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/129666