An automatic pin identification method for a three-phase DC brushless motor
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
3918 | en_US |
dc.citation.issue |
10 | en_US |
dc.citation.spage |
3916 | en_US |
dc.citation.volume |
41 | en_US |
dc.contributor.author |
Wang, SJ | en_US |
dc.contributor.author |
Cheng, CC | en_US |
dc.contributor.author |
Lin, SK | en_US |
dc.contributor.author |
Ju, JJ | en_US |
dc.contributor.author |
Huang, DR | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:18:21Z | |
dc.date.available |
2014-12-08T15:18:21Z | |
dc.date.issued |
2005-10-01 | en_US |
dc.description.abstract |
The pin identification is to find the definition of each connecting pin of a three-phase brushless motor. The 11 pins of the motor can be distinguished into three groups by a simple resistance measurement method. An automatic method has two steps. In the first step, the motor is in an open-circuited mode; and the individual pins of the windings are identified by comparing back electromotive forces. A special integral is defined and used to match Hall signal pins with the Hall sensors. The polarity of each pair of the Hall signal pins is determined by the second step of a standstill method. The proposed method is illustrated and verified by an experiment. | en_US |
dc.identifier.doi |
10.1109/TMAG.2005.854970 | en_US |
dc.identifier.issn |
0018-9464 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON MAGNETICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TMAG.2005.854970 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/13241 | |
dc.identifier.wosnumber |
WOS:000232679700441 | |
dc.language.iso |
en_US | en_US |
dc.subject |
identification | en_US |
dc.subject |
Lyapunov stability | en_US |
dc.subject |
motor characteristics | en_US |
dc.subject |
three-phase dc brushless motor | en_US |
dc.title |
An automatic pin identification method for a three-phase DC brushless motor | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
- 000232679700441.pdf (168.2 KB, Adobe PDF)
所屬典藏: 會議論文
引用此條目
Wang, S., Cheng, C., Lin, S., Ju, J., & Huang, D. (2005). An automatic pin identification method for a three-phase DC brushless motor. IEEE TRANSACTIONS ON MAGNETICS, 41(10), 3916–3918. https://doi.org/10.1109/TMAG.2005.854970
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/13241