Low-Leakage and Low-Trigger-Voltage SCR Device for ESD Protection in 28-nm High-k Metal Gate CMOS Process
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1390 | en_US |
dc.citation.issue |
11 | en_US |
dc.citation.spage |
1387 | en_US |
dc.citation.volume |
37 | en_US |
dc.contributor.author |
Lin, Chun-Yu | en_US |
dc.contributor.author |
Wu, Yi-Han | en_US |
dc.contributor.author |
Ker, Ming-Dou | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2017-04-21T06:55:58Z | |
dc.date.available |
2017-04-21T06:55:58Z | |
dc.date.issued |
2016-11 | en_US |
dc.description.abstract |
To effectively protect integrated circuits from electrostatic discharge (ESD) damage, this letter proposes a silicon-controlled rectifier (SCR) device with low trigger voltage, low leakage current, low parasitic capacitance, and which requires no additional process step. The proposed device uses two metal gates to separate the anode and cathode of the SCR to reduce the leakage current. These two gates are well controlled to trigger the SCR device. The test devices have been implemented and verified in a 28-nm high-k metal gate CMOS process. Experimental results show that the proposed SCR exhibits a low trigger voltage (<3 V), low leakage current (<5 nA), low parasitic capacitance (<40 fF), and sufficient ESD robustness (>1 kV in human-body-model tests). Based on its good performances during ESD stress and normal circuit operating conditions, the proposed SCR device is very suitable for ESD protection in advanced CMOS processes. | en_US |
dc.identifier.doi |
10.1109/LED.2016.2608721 | en_US |
dc.identifier.issn |
0741-3106 | en_US |
dc.identifier.journal |
IEEE ELECTRON DEVICE LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/LED.2016.2608721 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/132825 | |
dc.identifier.wosnumber |
WOS:000389331100005 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Electrostatic discharge (ESD) | en_US |
dc.subject |
leakage current | en_US |
dc.subject |
parasitic capacitance | en_US |
dc.subject |
silicon-controlled rectifier (SCR) | en_US |
dc.subject |
trigger voltage | en_US |
dc.title |
Low-Leakage and Low-Trigger-Voltage SCR Device for ESD Protection in 28-nm High-k Metal Gate CMOS Process | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Lin, C.-Y., Wu, Y.-H., & Ker, M.-D. (2016). Low-Leakage and Low-Trigger-Voltage SCR Device for ESD Protection in 28-nm High-k Metal Gate CMOS Process. IEEE ELECTRON DEVICE LETTERS, 37(11), 1387–1390. https://doi.org/10.1109/LED.2016.2608721
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/132825