Investigation of electrical characteristics on surrounding-gate and omega-shaped-gate nanowire FinFETs
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
516 | en_US |
dc.citation.issue |
5 | en_US |
dc.citation.spage |
510 | en_US |
dc.citation.volume |
4 | en_US |
dc.contributor.author |
Li, YM | en_US |
dc.contributor.author |
Chou, HM | en_US |
dc.contributor.author |
Lee, JW | en_US |
dc.contributor.department |
電信工程研究所 | zh_TW |
dc.contributor.department |
友訊交大聯合研發中心 | zh_TW |
dc.contributor.department |
Institute of Communications Engineering | en_US |
dc.contributor.department |
D Link NCTU Joint Res Ctr | en_US |
dc.date.accessioned |
2014-12-08T15:18:30Z | |
dc.date.available |
2014-12-08T15:18:30Z | |
dc.date.issued |
2005-09-01 | en_US |
dc.description.abstract |
In this paper, electrical characteristics of small nanowire fin field-effect transistor (FinFET) are investigated by using a three-dimensional quantum correction simulation. Taking several important electrical characteristics as evaluation criteria, two different nanowire FinFETs, the surrounding-gate and omega-shaped-gate devices, are examined and compared with respect to different ratios of the gate coverage. By calculating the ratio of the on/off current, the turn-on resistance, subthreshold swing, drain-induced channel barrier height lowing, and gate capacitance, it is found that the difference of the electrical characteristics between the surrounding-gate (i.e., the omega-shaped-gate device with 100% coverage) and the omega-shaped-gate nanowire FinFET with 70% coverage is insignificant. The examination presented here is useful in the fabrication of small omega-shaped-gate nanowire FinFETs. It clarifies the main difference between the surrounding-gate and omega-shaped-gate nanowire Fin FETs and exhibits a valuable result that the omega-shaped-gate device with 70% coverage plays an optimal candidate of the nanodevice structure when we consider both the device performance and manufacturability. | en_US |
dc.identifier.doi |
10.1109/TNANO.2005.851410 | en_US |
dc.identifier.issn |
1536-125X | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON NANOTECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TNANO.2005.851410 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/13314 | |
dc.identifier.wosnumber |
WOS:000231809500005 | |
dc.language.iso |
en_US | en_US |
dc.subject |
coverage ratio | en_US |
dc.subject |
device structure | en_US |
dc.subject |
fabrication | en_US |
dc.subject |
fin field-effect transistor (FinFET) | en_US |
dc.subject |
gate capacitance | en_US |
dc.subject |
nanodevice | en_US |
dc.subject |
nanowire | en_US |
dc.subject |
omega-shaped-gate | en_US |
dc.subject |
on/off ratio | en_US |
dc.subject |
process technique | en_US |
dc.subject |
quantum correction model | en_US |
dc.subject |
semiconductor devices | en_US |
dc.subject |
subthreshold swing (SS) | en_US |
dc.subject |
surrounding gate | en_US |
dc.subject |
three-dimensional (3-D) simulation | en_US |
dc.subject |
turn-on resistance | en_US |
dc.title |
Investigation of electrical characteristics on surrounding-gate and omega-shaped-gate nanowire FinFETs | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
- 000231809500005.pdf (430.7 KB, Adobe PDF)
所屬典藏: 會議論文