Cross-matching caches: Dynamic timing calibration and bit-level timing-failure mask caches to reduce timing discrepancies with low voltage processors
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
36 | en_US |
dc.citation.spage |
24 | en_US |
dc.citation.volume |
54 | en_US |
dc.contributor.author |
Wang, Po-Hao | en_US |
dc.contributor.author |
Tsai, Shang-Jen | en_US |
dc.contributor.author |
Tanjung, Rizal | en_US |
dc.contributor.author |
Lin, Tay-Jyi | en_US |
dc.contributor.author |
Wang, Jinn-Shyan | en_US |
dc.contributor.author |
Chen, Tien-Fu | en_US |
dc.contributor.department |
資訊工程學系 | zh_TW |
dc.contributor.department |
Department of Computer Science | en_US |
dc.date.accessioned |
2017-04-21T06:56:22Z | |
dc.date.available |
2017-04-21T06:56:22Z | |
dc.date.issued |
2016-06 | en_US |
dc.description.abstract |
Voltage scaling is an effective technique to reduce power consumption in processor systems. Unfortunately, timing discrepancies between L1 caches and cores occur with the scaling down of voltage. These discrepancies are primarily caused by the severe process variations of a few slow SRAM cells. Most previous designs tolerated slow cells by adjusting access latency based on a coarse-grained track of cache blocks. However, these methods become insufficient when the amount of slow cells increases. This paper addresses the issue for an 8T SRAM cache and proposes a cross-matching cache that includes dynamic timing calibration and actual bit-level timing-failure toleration. (C) 2016 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.vlsi.2016.01.001 | en_US |
dc.identifier.issn |
0167-9260 | en_US |
dc.identifier.journal |
INTEGRATION-THE VLSI JOURNAL | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.vlsi.2016.01.001 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/133617 | |
dc.identifier.wosnumber |
WOS:000374362900003 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Cache memory | en_US |
dc.subject |
Low voltage | en_US |
dc.subject |
Timing discrepancy | en_US |
dc.subject |
Timing-failure tolerance | en_US |
dc.title |
Cross-matching caches: Dynamic timing calibration and bit-level timing-failure mask caches to reduce timing discrepancies with low voltage processors | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Wang, P.-H., Tsai, S.-J., Tanjung, R., Lin, T.-J., Wang, J.-S., & Chen, T.-F. (2016). Cross-matching caches: Dynamic timing calibration and bit-level timing-failure mask caches to reduce timing discrepancies with low voltage processors. INTEGRATION-THE VLSI JOURNAL, 54, 24–36. https://doi.org/10.1016/j.vlsi.2016.01.001
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/133617