Step buffer layer of Al0.25Ga0.75N/Al0.08Ga0.92N on P-InAlN gate normally-off high electron mobility transistors
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.issue |
7 | en_US |
dc.citation.volume |
31 | en_US |
dc.contributor.author |
Shrestha, Niraj M. | en_US |
dc.contributor.author |
Li, Yiming | en_US |
dc.contributor.author |
Chang, E. Y. | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
資訊工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.contributor.department |
Department of Computer Science | en_US |
dc.date.accessioned |
2017-04-21T06:56:38Z | |
dc.date.available |
2017-04-21T06:56:38Z | |
dc.date.issued |
2016-07 | en_US |
dc.description.abstract |
Normally-off AlGaN/GaN high electron mobility transistors (HEMTs) are indispensable devices for power electronics as they can greatly simplify circuit designs in a cost-effective way. In this work, the electrical characteristics of p-type InAlN gate normally-off AlGaN/GaN HEMTs with a step buffer layer of Al0.25Ga0.75N/Al0.1Ga0.9N is studied numerically. Our device simulation shows that a p-InAlN gate with a step buffer layer allows the transistor to possess normally-off behavior with high drain current and high breakdown voltage simultaneously. The gate modulation by the p-InAlN gate and the induced holes appearing beneath the gate at the GaN/Al0.25Ga0.75N interface is because a hole appearing in the p-InAlN layer can effectively vary the threshold voltage positively. The estimated threshold voltage of the normally-off HEMTs explored is 2.5 V at a drain bias of 25 V, which is 220% higher than the conventional p-AlGaN normally-off AlGaN/GaN gate injection transistor (GIT). Concurrently, the maximum current density of the explored HEMT at a drain bias of 10 V slightly decreases by about 7% (from 240 to 223 mA mm(-1)). At a drain bias of 15 V, the current density reached 263 mA mm(-1). The explored structure is promising owing to tunable positive threshold voltage and the maintenance of similar current density; notably, its breakdown voltage significantly increases by 36% (from 800 V, GIT, to 1086 V). The engineering findings of this study indicate that novel p-InAlN for both the gate and the step buffer layer can feature a high threshold voltage, large current density and high operating voltage for advanced AlGaN/GaN HEMT devices. | en_US |
dc.identifier.doi |
10.1088/0268-1242/31/7/075006 | en_US |
dc.identifier.issn |
0268-1242 | en_US |
dc.identifier.journal |
SEMICONDUCTOR SCIENCE AND TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1088/0268-1242/31/7/075006 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/133906 | |
dc.identifier.wosnumber |
WOS:000378201700014 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
p-InAlN gate HEMT | en_US |
dc.subject |
step buffer layer | en_US |
dc.subject |
positive threshold voltage | en_US |
dc.subject |
breakdown voltage | en_US |
dc.subject |
drain current | en_US |
dc.subject |
2DEG | en_US |
dc.subject |
hole concentration | en_US |
dc.subject |
device simulation | en_US |
dc.title |
Step buffer layer of Al0.25Ga0.75N/Al0.08Ga0.92N on P-InAlN gate normally-off high electron mobility transistors | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Shrestha, N. M., Li, Y., & Chang, E. Y. (2016). Step buffer layer of Al0.25Ga0.75N/Al0.08Ga0.92N on P-InAlN gate normally-off high electron mobility transistors. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 31(7). https://doi.org/10.1088/0268-1242/31/7/075006
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/133906