Temperature and thermal deformation analysis on scrolls of scroll compressor
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1739 | en_US |
dc.citation.issue |
11-12 | en_US |
dc.citation.spage |
1724 | en_US |
dc.citation.volume |
25 | en_US |
dc.citation.woscount |
6 | |
dc.contributor.author |
Lin, CC | en_US |
dc.contributor.author |
Chang, YC | en_US |
dc.contributor.author |
Liang, KY | en_US |
dc.contributor.author |
Hung, CH | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:18:42Z | |
dc.date.available |
2014-12-08T15:18:42Z | |
dc.date.issued |
2005-08-01 | en_US |
dc.description.abstract |
The thermal deformation of scrolls significantly affects the hermetic property between scrolls, and thus affects the efficiency of the scroll compressor. An accurate temperature distribution on scrolls must be obtained before the thermal deformation of scrolls can be analyzed. The temperature inside real scrolls in the steady state was experimentally measured. Then, reasonable thermal boundary conditions were applied to perform a heat transfer analysis to determine the temperature distribution on scrolls. Then, the distribution of the thermal deformation on scrolls was analyzed. Finally, fixed and orbiting scrolls were engaged with each other and analyses were performed to determine the stress and deformation distributions at the orbital angle that the maximum compression ratio happens. (c) 2004 Elsevier Ltd. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.applthermaleng.2004.11.008 | en_US |
dc.identifier.issn |
1359-4311 | en_US |
dc.identifier.journal |
APPLIED THERMAL ENGINEERING | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.applthermaleng.2004.11.008 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/13440 | |
dc.identifier.wosnumber |
WOS:000229277400012 | |
dc.language.iso |
en_US | en_US |
dc.subject |
scroll | en_US |
dc.subject |
temperature | en_US |
dc.subject |
thermal deformation | en_US |
dc.subject |
finite element analysis | en_US |
dc.title |
Temperature and thermal deformation analysis on scrolls of scroll compressor | en_US |
dc.type |
Article | en_US |
檔案
- 000229277400012.pdf (781.6 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lin, C., Chang, Y., Liang, K., & Hung, C. (2005). Temperature and thermal deformation analysis on scrolls of scroll compressor. APPLIED THERMAL ENGINEERING, 25(11-12), 1724–1739. https://doi.org/10.1016/j.applthermaleng.2004.11.008
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/13440