完整後設資料紀錄
DC 欄位語言
dc.contributor.authorTsai, Ping-Yuanen_US
dc.contributor.authorHsu, Shu-Yuen_US
dc.contributor.authorChang, Jen-Shinen_US
dc.contributor.authorChen, Tsan-Wenen_US
dc.contributor.authorLee, Chen-Yien_US
dc.date.accessioned2017-04-21T06:48:20Z-
dc.date.available2017-04-21T06:48:20Z-
dc.date.issued2012en_US
dc.identifier.isbn978-1-4673-2771-8en_US
dc.identifier.urihttp://hdl.handle.net/11536/134773-
dc.description.abstractThis paper proposed a high speed Body Channel Communication (BCC) transmitter under IF 20MHz, adopting the OFDM modulation and uneven multi-level LINC technique to reduce the power and complexity of the front-end circuit. The OFDM uses 16-QAM modulation to enhance the data rate and could select to use a convolutional code to increase the coding gain. The phase modulator in the LInear amplification with Nonlinear Component (LINC) transmitter uses not only clock-gating scheme but also the glitch free protection. A detection and calibration DSP are also integrated to solve the LINC branch mismatch problem. Finally the capacitive sensing circuit provides the information of the connectivity between pastes and human. The chip is implemented by 90nm CMOS process, with die area 1.3mm(2). The maximum data rate could achieve 29.1Mbps. The total power is 1.925mW, resulting in 0.07nJ/bit transmission energy and 2.92 bps/Hz spectral efficiency.en_US
dc.language.isoen_USen_US
dc.titleA QPSK/16-QAM OFDM-based 29.1Mbps LINC Transmitter for Body Channel Communicationen_US
dc.typeProceedings Paperen_US
dc.identifier.journal2012 IEEE Asian Solid State Circuits Conference (A-SSCC)en_US
dc.citation.spage345en_US
dc.citation.epage348en_US
dc.contributor.department電子工程學系及電子研究所zh_TW
dc.contributor.departmentDepartment of Electronics Engineering and Institute of Electronicsen_US
dc.identifier.wosnumberWOS:000392841900087en_US
dc.citation.woscount0en_US
顯示於類別:會議論文