Modeling geometry-dependent floating-body effect using body-source built-in potential lowering for SOI circuit simulation
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2370 | en_US |
dc.citation.issue |
4B | en_US |
dc.citation.spage |
2366 | en_US |
dc.citation.volume |
44 | en_US |
dc.citation.woscount |
0 | |
dc.contributor.author |
Su, P | en_US |
dc.contributor.author |
Lee, W | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:19:23Z | |
dc.date.available |
2014-12-08T15:19:23Z | |
dc.date.issued |
2005-04-01 | en_US |
dc.description.abstract |
This paper presents a compact silicon-on-insulator (SOI) model to capture the geometry-dependent floating-body effect using the body-source built-in potential lowering approach. This physically accurate model circumvents the modeling challenge imposed by the trend of the coexistence of partial-depletion (PD) and full-depletion (FD) devices in a single SOI chip by considering short-channel, reverse short-channel and reverse narrow-width floating-body effects. The implication on circuit simulation, under the unified Berkeley short-channel IGFET model-silicon-on-insulator (BSIMSOI) framework, has also been addressed. This geometry-dependent body-source built-in potential lowering model will further enhance the device design of scaled SOI complementary metal-oxide-semiconductor (CMOS) below 100 nm. | en_US |
dc.identifier.doi |
10.1143/JJAP.44.2366 | en_US |
dc.identifier.issn |
0021-4922 | en_US |
dc.identifier.journal |
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1143/JJAP.44.2366 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/13842 | |
dc.identifier.wosnumber |
WOS:000229095700057 | |
dc.language.iso |
en_US | en_US |
dc.subject |
floating-body effect | en_US |
dc.subject |
body-source built-in potential lowering | en_US |
dc.subject |
SOICMOS | en_US |
dc.subject |
circuit simulation | en_US |
dc.title |
Modeling geometry-dependent floating-body effect using body-source built-in potential lowering for SOI circuit simulation | en_US |
dc.type |
Article | en_US |
檔案
- 000229095700057.pdf (735.4 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Su, P., & Lee, W. (2005). Modeling geometry-dependent floating-body effect using body-source built-in potential lowering for SOI circuit simulation. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 44(4B), 2366–2370. https://doi.org/10.1143/JJAP.44.2366
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/13842