Design and Simulation of Intermediate Band Solar Cell With Ultradense Type-II Multilayer Ge/Si Quantum Dot Superlattice
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
4553 | en_US |
dc.citation.spage |
4547 | en_US |
dc.citation.volume |
64 | en_US |
dc.contributor.author |
Tsai, Yi-Chia | en_US |
dc.contributor.author |
Lee, Ming-Yi | en_US |
dc.contributor.author |
Li, Yiming | en_US |
dc.contributor.author |
Samukawa, Seiji | en_US |
dc.contributor.department |
資訊工程學系 | zh_TW |
dc.contributor.department |
Department of Computer Science | en_US |
dc.date.accessioned |
2018-08-21T05:52:50Z | |
dc.date.available |
2018-08-21T05:52:50Z | |
dc.date.issued |
2017-11-01 | en_US |
dc.description.abstract |
We studied the miniband dependence on the structural parameters and shape in type-II multilayer germanium (Ge)/silicon (Si) quantum dot superlattice (QDSL) solar cell. A maximum tunable range of ground-state energy is 19% by tuning layer distance down to 0.5 nm, whereas 24.5% is achieved by adjusting the horizontal dot-to-dot spacing down to 0.3 nm. The reduction of effective bandgap is severe for cylindrical QDs than ellipsoidal and conical QDs in the ultradense QDSL, thus leading to a relatively lower conversion efficiency. On average, the thickness of QD shows a negative correlation to conversion efficiency. We observed a high conversion efficiency of 27.22% in a bilayer conical QDSL under an AM1.5 spectral irradiance and one sun illumination. | en_US |
dc.identifier.doi |
10.1109/TED.2017.2755069 | en_US |
dc.identifier.issn |
0018-9383 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON ELECTRON DEVICES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TED.2017.2755069 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/143992 | |
dc.identifier.wosnumber |
WOS:000413732500026 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Conversion efficiency | en_US |
dc.subject |
density of states (DoSs) | en_US |
dc.subject |
Ge/Si quantum dot (QD) | en_US |
dc.subject |
layer distance | en_US |
dc.subject |
minibands | en_US |
dc.subject |
multilayer | en_US |
dc.subject |
solar cell | en_US |
dc.subject |
superlattice | en_US |
dc.title |
Design and Simulation of Intermediate Band Solar Cell With Ultradense Type-II Multilayer Ge/Si Quantum Dot Superlattice | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Tsai, Y.-C., Lee, M.-Y., Li, Y., & Samukawa, S. (2017). Design and Simulation of Intermediate Band Solar Cell With Ultradense Type-II Multilayer Ge/Si Quantum Dot Superlattice. IEEE TRANSACTIONS ON ELECTRON DEVICES, 64, 4547–4553. https://doi.org/10.1109/TED.2017.2755069
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/143992