Physical and electrical characteristics of Si/SiC quantum dot superlattice solar cells with passivation layer of aluminum oxide
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.volume |
28 | en_US |
dc.contributor.author |
Tsai, Yi-Chia | en_US |
dc.contributor.author |
Li, Yiming | en_US |
dc.contributor.author |
Samukawa, Seiji | en_US |
dc.contributor.department |
資訊工程學系 | zh_TW |
dc.contributor.department |
電信工程研究所 | zh_TW |
dc.contributor.department |
Department of Computer Science | en_US |
dc.contributor.department |
Institute of Communications Engineering | en_US |
dc.date.accessioned |
2018-08-21T05:52:52Z | |
dc.date.available |
2018-08-21T05:52:52Z | |
dc.date.issued |
2017-12-01 | en_US |
dc.description.abstract |
In this work, we numerically simulate the silicon (Si)/silicon carbide (SiC) quantum dot superlattice solar cell (SiC-QDSL) with aluminum oxide (Al2O3-QDSL) passivation. By exploiting the passivation layer of Al2O3, the high photocurrent and the conversion efficiency can be achieved without losing the effective bandgap. Based on the two-photon transition mechanism in an AM1.5 and a one sun illumination, the simulated short-circuit current (J(sc)) of 4.77 mA cm(-2) is very close to the experimentally measured 4.75 mA cm(-2), which is higher than those of conventional SiC-QDSLs. Moreover, the efficiency fluctuation caused by the structural variation is less sensitive by using the passivation layer. A high conversion efficiency of 17.4% is thus estimated by adopting the QD's geometry used in the experiment; and, it can be further boosted by applying a hexagonal QD formation with an inter-dot spacing of 0.3 nm. | en_US |
dc.identifier.doi |
10.1088/1361-6528/aa90f1 | en_US |
dc.identifier.issn |
0957-4484 | en_US |
dc.identifier.journal |
NANOTECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1088/1361-6528/aa90f1 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/144040 | |
dc.identifier.wosnumber |
WOS:000414553500001 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
quantum dot | en_US |
dc.subject |
superlattice | en_US |
dc.subject |
solar cells | en_US |
dc.subject |
Si/SiC | en_US |
dc.subject |
physical characteristic | en_US |
dc.subject |
electrical characteristic | en_US |
dc.subject |
minibands | en_US |
dc.title |
Physical and electrical characteristics of Si/SiC quantum dot superlattice solar cells with passivation layer of aluminum oxide | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Tsai, Y.-C., Li, Y., & Samukawa, S. (2017). Physical and electrical characteristics of Si/SiC quantum dot superlattice solar cells with passivation layer of aluminum oxide. NANOTECHNOLOGY, 28. https://doi.org/10.1088/1361-6528/aa90f1
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/144040