Effect of elliptical winglet on the air-side performance of fin-and-tube heat exchanger
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
599 | en_US |
dc.citation.spage |
583 | en_US |
dc.citation.volume |
123 | en_US |
dc.contributor.author |
Chimres, Nares | en_US |
dc.contributor.author |
Wang, Chi-Chuan | en_US |
dc.contributor.author |
Wongwises, Somchai | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2018-08-21T05:53:45Z | |
dc.date.available |
2018-08-21T05:53:45Z | |
dc.date.issued |
2018-08-01 | en_US |
dc.description.abstract |
This study numerically examines the elliptical winglets (EW) on the overall performance of fin-and-tube heat exchanger. The major geometrical parameters characterizing the EW has been investigated thoroughly, including the winglet location, attack angle and the trailing angle of the elliptical winglets with two different winglet lengths which are 1.0 mm and 1.5 mm. The numerical results indicate that the elliptical winglets with the 30 degrees attack angle, 0 mm horizontal distance, 6 mm vertical distance and 120 degrees trailing angle of both winglet lengths shows the highest performance. The heat transfer coefficients and pressure drops obtained by both winglet sizes are larger than that of the plain fin by about 13% and 35%, respectively. In term of the performance efficiency index, the 1.5 mm winglet length indicates about 1.8-2.9% improvement relative to plain fin geometry and the efficiency index of 1.0 mm winglet length is comparable with that of the plain fin. (C) 2018 Elsevier Ltd. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.ijheatmasstransfer.2018.02.079 | en_US |
dc.identifier.issn |
0017-9310 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.02.079 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/145118 | |
dc.identifier.wosnumber |
WOS:000434887000049 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Fin and tube heat exchanger | en_US |
dc.subject |
Heat transfer enhancement | en_US |
dc.subject |
CFD | en_US |
dc.subject |
Vortex generator | en_US |
dc.subject |
Elliptical winglet | en_US |
dc.title |
Effect of elliptical winglet on the air-side performance of fin-and-tube heat exchanger | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chimres, N., Wang, C.-C., & Wongwises, S. (2018). Effect of elliptical winglet on the air-side performance of fin-and-tube heat exchanger. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 123, 583–599. https://doi.org/10.1016/j.ijheatmasstransfer.2018.02.079
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/145118