Sensing and structural properties of Ti-doped tin oxide (SnO2) membrane for bio-sensor applications
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
10391 | en_US |
dc.citation.spage |
10386 | en_US |
dc.citation.volume |
43 | en_US |
dc.contributor.author |
Isabel, A. Panimaya Selvi | en_US |
dc.contributor.author |
Kao, Chyuan Haur | en_US |
dc.contributor.author |
Mahanty, Rama Krushna | en_US |
dc.contributor.author |
Wu, Yew Chung Sermon | en_US |
dc.contributor.author |
Li, Chung Yi | en_US |
dc.contributor.author |
Lin, Chan Yu | en_US |
dc.contributor.author |
Lin, Chun Fu | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2018-08-21T05:54:21Z | |
dc.date.available |
2018-08-21T05:54:21Z | |
dc.date.issued |
2017-09-01 | en_US |
dc.description.abstract |
We investigated the effect of rapid thermal annealing (RTA) on the sensing and structural characteristics of Ti-doped SnO2 based electrolyte-insulator-semiconductor (EIS) pH sensors. The Ti-doped Tin oxide (SnO2) EIS sensor annealed at 700 degrees C post deposition annealing, exhibits the best sensing characteristics in terms of sensitivity, linearity, hysteresis and drift rate. This derives from Ti incorporation that improves the thin-film stoichiometry by reducing dangling bonds on the dielectric surface and improves the temperature stability. We further studied the structural, compositional, and morphological characteristics of the deposited thin-film. RTA treatment increases the sensitivity and linearity by creating larger grain size and higher number of surface sites. Sodium (Na+) and potassium (K+) sensing performance was also measured using the fabricated EIS sensors. | en_US |
dc.identifier.doi |
10.1016/j.ceramint.2017.05.073 | en_US |
dc.identifier.issn |
0272-8842 | en_US |
dc.identifier.journal |
CERAMICS INTERNATIONAL | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.ceramint.2017.05.073 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/145843 | |
dc.identifier.wosnumber |
WOS:000406438700104 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Ti-doped | en_US |
dc.subject |
SnO2 | en_US |
dc.subject |
Sensing membrane | en_US |
dc.title |
Sensing and structural properties of Ti-doped tin oxide (SnO2) membrane for bio-sensor applications | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Isabel, A. P. S., Kao, C. H., Mahanty, R. K., Wu, Y. C. S., Li, C. Y., Lin, C. Y., & Lin, C. F. (2017). Sensing and structural properties of Ti-doped tin oxide (SnO2) membrane for bio-sensor applications. CERAMICS INTERNATIONAL, 43, 10386–10391. https://doi.org/10.1016/j.ceramint.2017.05.073
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/145843