Wave Number-Based Technique for Detecting Slope Discontinuity in Simple Beams Using Moving Test Vehicle
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.volume |
17 | en_US |
dc.contributor.author |
Yau, J. D. | en_US |
dc.contributor.author |
Yang, Judy P. | en_US |
dc.contributor.author |
Yang, Y. B. | en_US |
dc.contributor.department |
土木工程學系 | zh_TW |
dc.contributor.department |
Department of Civil Engineering | en_US |
dc.date.accessioned |
2018-08-21T05:54:28Z | |
dc.date.available |
2018-08-21T05:54:28Z | |
dc.date.issued |
2017-08-01 | en_US |
dc.description.abstract |
The wavelength characteristic is a useful clue for locating and assessing the severity of slope discontinuity in beams. In this study, the slope discontinuity of a beam is represented by an internal hinge restrained by elastic springs, and the wavelength of the beam is calculated indirectly from the vertical response of a test vehicle during its travel over the beam. The key parameters of the problem at hand are first unveiled using an approximate, closed-form solution for the response of the vehicle moving at low speeds over the bridge. Then a two-beam element model with slope discontinuity is formulated for the vehicle-bridge interaction (VBI) system for use in numerical simulation. In the examples, the wavenumber-based response of the test vehicle is used to identify the location and severity of the discontinuity in the beam. It is demonstrated that the wavelength-based technique presented herein by using the moving test vehicle as a moving sensor system offers a promising, alternative approach for damage detection in girder type bridges. | en_US |
dc.identifier.doi |
10.1142/S0219455417500602 | en_US |
dc.identifier.issn |
0219-4554 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1142/S0219455417500602 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/145984 | |
dc.identifier.wosnumber |
WOS:000408564000006 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Bridge | en_US |
dc.subject |
slope discontinuity | en_US |
dc.subject |
test vehicle | en_US |
dc.subject |
wavelength | en_US |
dc.subject |
wave number | en_US |
dc.title |
Wave Number-Based Technique for Detecting Slope Discontinuity in Simple Beams Using Moving Test Vehicle | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Yau, J. D., Yang, J. P., & Yang, Y. B. (2017). Wave Number-Based Technique for Detecting Slope Discontinuity in Simple Beams Using Moving Test Vehicle. INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 17. https://doi.org/10.1142/S0219455417500602
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/145984