Experimental Platforms and Die Design for Hot Stamping of a Patchwork Blank
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
449 | en_US |
dc.citation.spage |
443 | en_US |
dc.contributor.author |
Chen, F. K. | en_US |
dc.contributor.author |
Hung, T. H. | en_US |
dc.contributor.author |
Hung, C. H. | en_US |
dc.contributor.author |
Huang, T. B. | en_US |
dc.contributor.author |
Chen, T. R. | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2018-08-21T05:56:49Z | |
dc.date.available |
2018-08-21T05:56:49Z | |
dc.date.issued |
2017-01-01 | en_US |
dc.description.abstract |
The hot stamping of a patchwork blank is one of the forming processes being applied to manufacture automobile structural parts. In order to perform the finite element analysis for patchwork blank hot stamping process, the material behavior of blank and interface parameters between blank and tools are required in the finite element model. In this paper, the experimental platforms for obtaining interface parameters including coefficient of friction and interface heat transfer coefficient were established. Then, the finite element analysis model for patchwork blank hot stamping process was constructed. The forming mechanisms, stamping die design, and cooling system design were also examined in this study. Finally, the experimental interface parameters and stamping die design were applied to the finite element analysis for the hot stamping of a patchwork part. | en_US |
dc.identifier.journal |
ADVANCED HIGH STRENGTH STEEL AND PRESS HARDENING | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/146696 | |
dc.identifier.wosnumber |
WOS:000405227400061 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Hot stamping | en_US |
dc.subject |
Tailored properties | en_US |
dc.subject |
Patchwork hot stamping | en_US |
dc.subject |
Finite element analysis | en_US |
dc.subject |
Interface heat transfer coefficient | en_US |
dc.subject |
Coefficient of friction | en_US |
dc.subject |
Cooling channel design | en_US |
dc.title |
Experimental Platforms and Die Design for Hot Stamping of a Patchwork Blank | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Chen, F. K., Hung, T. H., Hung, C. H., Huang, T. B., & Chen, T. R. (2017). Experimental Platforms and Die Design for Hot Stamping of a Patchwork Blank. ADVANCED HIGH STRENGTH STEEL AND PRESS HARDENING, 443–449. https://ir.lib.nycu.edu.tw/handle/11536/146696
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/146696