Analyzing Electric Field Effect by Applying an Ultra-Short Time Pulse Condition in Hafnium Oxide-Based RRAM
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1166 | en_US |
dc.citation.spage |
1163 | en_US |
dc.citation.volume |
39 | en_US |
dc.citation.woscount |
1 | en_US |
dc.contributor.author |
Wu, Cheng-Hsien | en_US |
dc.contributor.author |
Lin, Shih-Kai | en_US |
dc.contributor.author |
Pan, Chih-Hung | en_US |
dc.contributor.author |
Chen, Po-Hsun | en_US |
dc.contributor.author |
Lin, Wen-Yan | en_US |
dc.contributor.author |
Chang, Ting-Chang | en_US |
dc.contributor.author |
Tsai, Tsung-Ming | en_US |
dc.contributor.author |
Xu, You-Lin | en_US |
dc.contributor.author |
Shih, Chih-Cheng | en_US |
dc.contributor.author |
Lin, Yu-Shuo | en_US |
dc.contributor.author |
Chen, Wen-Chung | en_US |
dc.contributor.author |
Wang, Ming-Hui | en_US |
dc.contributor.author |
Zhang, Sheng-Dong | en_US |
dc.contributor.author |
Sze, Simon M. | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2019-04-02T05:59:36Z | |
dc.date.available |
2019-04-02T05:59:36Z | |
dc.date.issued |
2018-08-01 | en_US |
dc.description.abstract |
In this letter, we determine the importance of the electrical field distribution and strength during the switching process by demonstrating different trends in the degree of reset and the reset pulse time. In general, a longer reset pulse time results in a higher reset energy; a higher reset energy leads to a higher degree of reset, which we obtainedby applying different width square waves. But quite notably, the opposite result was obtained using triangle waves, where a higher degree of reset occurred with a shorter rising time and lower reset energy. We believe that this is due to the electric field effect: if the voltage rises faster than the filament oxidation, the device can produce a larger effective electric field and a higher resistance in the reset process. To further investigate the mechanism, the procedure of the reset process was analyzed in detail, and COMSOL simulation is also carried out for confirmation. | en_US |
dc.identifier.doi |
10.1109/LED.2018.2849507 | en_US |
dc.identifier.issn |
0741-3106 | en_US |
dc.identifier.journal |
IEEE ELECTRON DEVICE LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/LED.2018.2849507 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/147920 | |
dc.identifier.wosnumber |
WOS:000440006100012 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
RRAM | en_US |
dc.subject |
electrical field | en_US |
dc.subject |
simulation | en_US |
dc.subject |
filament oxidation | en_US |
dc.title |
Analyzing Electric Field Effect by Applying an Ultra-Short Time Pulse Condition in Hafnium Oxide-Based RRAM | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Wu, C.-H., Lin, S.-K., Pan, C.-H., Chen, P.-H., Lin, W.-Y., Chang, T.-C., Tsai, T.-M., Xu, Y.-L., Shih, C.-C., Lin, Y.-S., Chen, W.-C., Wang, M.-H., Zhang, S.-D., & Sze, S. M. (2018). Analyzing Electric Field Effect by Applying an Ultra-Short Time Pulse Condition in Hafnium Oxide-Based RRAM. IEEE ELECTRON DEVICE LETTERS, 39, 1163–1166. https://doi.org/10.1109/LED.2018.2849507
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/147920