Direct joining of 3D-printed thermoplastic parts to SLM-fabricated metal cellular structures by ultrasonic welding
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
736 | en_US |
dc.citation.spage |
729 | en_US |
dc.citation.volume |
99 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Tang, Sheng-Hung | en_US |
dc.contributor.author |
Cheng, Chung-Wei | en_US |
dc.contributor.author |
Yeh, Ren-Yu | en_US |
dc.contributor.author |
Hsu, Ray-Quan | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2019-04-02T06:00:23Z | |
dc.date.available |
2019-04-02T06:00:23Z | |
dc.date.issued |
2018-10-01 | en_US |
dc.description.abstract |
The joining capability of metal cellular structures fabricated using the additive manufacturing (selective laser melting (SLM)) method is investigated herein. The metal cellular structures are composed of sub-millimeter holes and internal pores. The direct joining of 3D-printed ABS-M30i thermoplastic parts to metal cellular structures by ultrasonic welding is demonstrated. The SLM-fabricated structures comprised of partially melted powders provide micro-scale roughness, which enhances the micro-mechanical interlocking between joining parts. A shear strength 17.7MPa and normal tensile strength of 15.2MPa were obtained, up to 55 and 48% of ABS-M30i ultimate tensile strength, respectively. Moreover, normal tensile plastic strength up to 86% of the shear strength was obtained. | en_US |
dc.identifier.doi |
10.1007/s00170-018-2409-8 | en_US |
dc.identifier.issn |
0268-3768 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1007/s00170-018-2409-8 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/148223 | |
dc.identifier.wosnumber |
WOS:000445800600055 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Additive manufacturing | en_US |
dc.subject |
Selective laser melting | en_US |
dc.subject |
Ultrasonic welding | en_US |
dc.subject |
Micro-mechanical interlocking | en_US |
dc.title |
Direct joining of 3D-printed thermoplastic parts to SLM-fabricated metal cellular structures by ultrasonic welding | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Tang, S.-H., Cheng, C.-W., Yeh, R.-Y., & Hsu, R.-Q. (2018). Direct joining of 3D-printed thermoplastic parts to SLM-fabricated metal cellular structures by ultrasonic welding. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 99, 729–736. https://doi.org/10.1007/s00170-018-2409-8
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/148223