Development of composite filters with high efficiency, low pressure drop, and high holding capacity PM2.5 filtration
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
708 | en_US |
dc.citation.spage |
699 | en_US |
dc.citation.volume |
212 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Chang, De-Qiang | en_US |
dc.contributor.author |
Tien, Chi-Yu | en_US |
dc.contributor.author |
Peng, Chien-Yuan | en_US |
dc.contributor.author |
Tang, Min | en_US |
dc.contributor.author |
Chen, Sheng-Chieh | en_US |
dc.contributor.department |
環境工程研究所 | zh_TW |
dc.contributor.department |
Institute of Environmental Engineering | en_US |
dc.date.accessioned |
2019-04-02T06:00:30Z | |
dc.date.available |
2019-04-02T06:00:30Z | |
dc.date.issued |
2019-04-01 | en_US |
dc.description.abstract |
Many efforts are being made to develop filters with high efficiency and high holding capacity but remaining a low pressure drop. A two-layer composite filter to achieve the goal was developed, in which the first layer was a charged coarse fibers to provide large void space for particle loading and the second was a thin layer of charged melt-blown with finer fibers to enhance the overall efficiency. Experimental results showed that although the new composite media had a lower initial efficiency than the other two HEPA filters (PTFE and glass fiber filter), its figure of merit (FOM) was the highest. Besides, the composite media had a better holding capacity for PM2.5 than the other two. At a fixed mass load, i.e., 2 g m(-2), the PTFE (Delta P = 380 Pa) and glass fiber (Delta P = 165 Pa) required around 7.6 and 3.3 times more power, respectively, than the composite media (Delta P = 50 Pa). Due to the low charge level of the coarse fiber layer and the fine fiber diameter of the melt-blown layer, resulted in no efficiency reduction along the loading process. Theoretical analysis showed that the charge shielding and the loss of efficiency in the successive top-down layers were timely compensated by the efficiency enhancement caused by the loading effects, which made the composite media a much uniform deposition of PM2.5 in layers. This was the main reason resulting in the high holding capacity and low pressure drop of the current composite media which acted like a perfect depth filtration media. | en_US |
dc.identifier.doi |
10.1016/j.seppur.2018.11.068 | en_US |
dc.identifier.issn |
1383-5866 | en_US |
dc.identifier.journal |
SEPARATION AND PURIFICATION TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.seppur.2018.11.068 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/148828 | |
dc.identifier.wosnumber |
WOS:000457814700079 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
PM2.5 | en_US |
dc.subject |
Infiltration | en_US |
dc.subject |
Electret media | en_US |
dc.subject |
Composite media | en_US |
dc.subject |
Energy saving | en_US |
dc.subject |
Holding capacity | en_US |
dc.title |
Development of composite filters with high efficiency, low pressure drop, and high holding capacity PM2.5 filtration | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chang, D.-Q., Tien, C.-Y., Peng, C.-Y., Tang, M., & Chen, S.-C. (2019). Development of composite filters with high efficiency, low pressure drop, and high holding capacity PM2.5 filtration. SEPARATION AND PURIFICATION TECHNOLOGY, 212, 699–708. https://doi.org/10.1016/j.seppur.2018.11.068
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/148828