A two-level optimization procedure for material characterization of composites using two symmetric angle-ply beams
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1121 | en_US |
dc.citation.spage |
1113 | en_US |
dc.citation.volume |
49 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Chen, C. M. | en_US |
dc.contributor.author |
Kam, T. Y. | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2019-04-02T06:01:02Z | |
dc.date.available |
2019-04-02T06:01:02Z | |
dc.date.issued |
2007-10-01 | en_US |
dc.description.abstract |
A two-level optimization procedure for determining elastic constants E-1, E-2, G(12), and v(12) of laminated composite materials using measured axial and lateral strains of two symmetric angle-ply beams with different fiber angles subjected to three-point-bending testing is presented. In the first-level optimization process, the theoretically and experimentally predicted axial and lateral strains of a [(45 degrees/-45 degrees)(6)](s) beam are used to construct the strain discrepancy function which is a measure of the sum of the squared differences between the experimental and theoretical predictions of the axial and lateral strains. The identification of the material constants is then formulated as a constrained minimization problem in which the best estimates of shear modulus and Poisson's ratio of the beam are determined to make the strain discrepancy function a global minimum. In the second-level optimization process, shear modulus and Poisson's ratio determined in the first level of optimization are kept constant and Young's moduli of the second angle-ply beam with fiber angles different from 45 degrees are identified by minimizing the strain discrepancy function established t this level of optimization. The suitability of the proposed procedure for material characterization of composite materials has been demonstrated by means of a number of examples. (c) 2007 Elsevier Ltd. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.ijmecsci.2007.03.001 | en_US |
dc.identifier.issn |
0020-7403 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.ijmecsci.2007.03.001 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/149279 | |
dc.identifier.wosnumber |
WOS:000250996800004 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
angle-ply beam | en_US |
dc.subject |
elastic constants | en_US |
dc.subject |
identification | en_US |
dc.subject |
optimization | en_US |
dc.title |
A two-level optimization procedure for material characterization of composites using two symmetric angle-ply beams | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chen, C. M., & Kam, T. Y. (2007). A two-level optimization procedure for material characterization of composites using two symmetric angle-ply beams. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 49, 1113–1121. https://doi.org/10.1016/j.ijmecsci.2007.03.001
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149279