A three-parameters-only MOSFET subthreshold current CAD model considering back-gate bias and process variation
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
352 | en_US |
dc.citation.spage |
343 | en_US |
dc.citation.volume |
16 | en_US |
dc.citation.woscount |
7 | en_US |
dc.contributor.author |
Chen, MJ | en_US |
dc.contributor.author |
Ho, JS | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2019-04-02T05:59:47Z | |
dc.date.available |
2019-04-02T05:59:47Z | |
dc.date.issued |
1997-04-01 | en_US |
dc.description.abstract |
In this paper we introduce a new subthreshold conduction CAD model for simulation of VLSI subthreshold CMOS analog circuits and systems, This model explicitly formulates the back-gate bias effect and preserves the original advantages of the existing four-parameter model while reducing the fitting parameter number down to three, A transparent relationship between the fitting parameters and the process parameters has been derived, and its correlation with a recently widely used CAD model as well as with a well-known two-parameter model has been established, Our extensive measurement work on n-channel MOSFET's has highlighted the potential of the model in handling the variations in the subthreshold I-V characteristics at different back-gate biases arising from process variations, The mismatch analysis has further been successfully performed with emphasis on the reverse back-gate bias effect. In summary, the proposed model can serve as a promising alternative in the area of VLSI subthreshold CMOS analog circuit simulation. | en_US |
dc.identifier.doi |
10.1109/43.602471 | en_US |
dc.identifier.issn |
0278-0070 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/43.602471 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/149593 | |
dc.identifier.wosnumber |
WOS:A1997XM96800002 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
back-gate bias | en_US |
dc.subject |
CAD model | en_US |
dc.subject |
CMOS analog circuits | en_US |
dc.subject |
mismatch | en_US |
dc.subject |
subthreshold | en_US |
dc.subject |
process variation | en_US |
dc.title |
A three-parameters-only MOSFET subthreshold current CAD model considering back-gate bias and process variation | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chen, M., & Ho, J. (1997). A three-parameters-only MOSFET subthreshold current CAD model considering back-gate bias and process variation. IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, 16, 343–352. https://doi.org/10.1109/43.602471
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149593