Positive Bias Temperature Instability (PBTI) Characteristics of Contact-Etch-Stop-Layer-Induced Local-Tensile-Strained HfO2 nMOSFET
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1343 | en_US |
dc.citation.spage |
1340 | en_US |
dc.citation.volume |
29 | en_US |
dc.citation.woscount |
12 | en_US |
dc.contributor.author |
Wu, Woei-Cherng | en_US |
dc.contributor.author |
Chao, Tien-Sheng | en_US |
dc.contributor.author |
Chiu, Te-Hsin | en_US |
dc.contributor.author |
Wang, Jer-Chyi | en_US |
dc.contributor.author |
Lai, Chao-Sung | en_US |
dc.contributor.author |
Ma, Ming-Wen | en_US |
dc.contributor.author |
Lo, Wen-Cheng | en_US |
dc.contributor.department |
電子物理學系 | zh_TW |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electrophysics | en_US |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2019-04-02T06:00:59Z | |
dc.date.available |
2019-04-02T06:00:59Z | |
dc.date.issued |
2008-12-01 | en_US |
dc.description.abstract |
The positive bias temperature instability (PBTI) characteristics of contact-etch-stop-layer (CESL)-strained HfO2 nMOSFET are thoroughly investigated. For the first time, the effects of CESL on an HfO2 dielectric are investigated for PBTI characteristics. A roughly 50% reduction Of V-TH shift can be achieved for the 300-nm CESL HfO2 nMOSFET after 1000-s PBTI stressing without obvious HfO2/Si interface degradation, as demonstrated by the negligible charge pumping current increase (< 4%). In addition, the HfO2 film of CESL devices has a deeper trapping level (0.83 eV), indicating that most of the shallow traps (0.75 eV) in as-deposited HfO2 film can be eliminated for CESL devices. | en_US |
dc.identifier.doi |
10.1109/LED.2008.2005519 | en_US |
dc.identifier.issn |
0741-3106 | en_US |
dc.identifier.journal |
IEEE ELECTRON DEVICE LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/LED.2008.2005519 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/149719 | |
dc.identifier.wosnumber |
WOS:000262062000016 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Contact etch stop layer (CESL) | en_US |
dc.subject |
HfO2 | en_US |
dc.subject |
positive bias temperature instability (PBTI) | en_US |
dc.title |
Positive Bias Temperature Instability (PBTI) Characteristics of Contact-Etch-Stop-Layer-Induced Local-Tensile-Strained HfO2 nMOSFET | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Wu, W.-C., Chao, T.-S., Chiu, T.-H., Wang, J.-C., Lai, C.-S., Ma, M.-W., & Lo, W.-C. (2008). Positive Bias Temperature Instability (PBTI) Characteristics of Contact-Etch-Stop-Layer-Induced Local-Tensile-Strained HfO2 nMOSFET. IEEE ELECTRON DEVICE LETTERS, 29, 1340–1343. https://doi.org/10.1109/LED.2008.2005519
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149719