Growth of BiFeO3/SrTiO3 artificial superlattice structure by RF sputtering
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
95 | en_US |
dc.citation.spage |
90 | en_US |
dc.citation.volume |
334 | en_US |
dc.citation.woscount |
10 | en_US |
dc.contributor.author |
Chiu, Shang-Jui | en_US |
dc.contributor.author |
Liu, Yen-Ting | en_US |
dc.contributor.author |
Lee, Hsin-Yi | en_US |
dc.contributor.author |
Yu, Ge-Ping | en_US |
dc.contributor.author |
Huang, Jia-Hong | en_US |
dc.contributor.department |
加速器光源科技與應用學位學程 | zh_TW |
dc.contributor.department |
Master and Ph.D. Program for Science and Technology of Accelrrator Light Source | en_US |
dc.date.accessioned |
2019-04-02T05:59:38Z | |
dc.date.available |
2019-04-02T05:59:38Z | |
dc.date.issued |
2011-11-01 | en_US |
dc.description.abstract |
Asymmetric superlattice structures consisting of multiferroic BiFeO3 (BFO) and paraelectric SrTiO3 (STO) sublayers were grown on a Nb-doped STO substrate by RF magnetron sputtering at temperatures in the range 500-800 degrees C. For substrate temperatures less than 500 degrees C and at 800 degrees C, only poorly crystalline films resulted, whereas a BFO/STO superlattice structure film of great crystalline quality was obtained for a substrate temperature in the range 550-750 degrees C. The formation of a superlattice structure was confirmed through both the appearance of Bragg lines separated by Kiessig fringes in X-ray reflectivity curves and the satellite features of a (002) diffraction pattern. The clearly discernible main and satellite features on both sides of the substrate about the (002) STO Bragg peak of superlattice films indicate the high quality of the BFO/STO artificial superlattice structure. For BFO/STO superlattice films deposited at 600-700 degrees C, the increased crystalline quality with smaller interface roughness correlates with larger lattice strain and remanent polarization of the film. The lattice strain and interface quality might be important factors that influence the leakage and ferroelectric properties in BFO/STO artificial superlattices. (C) 2011 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.jcrysgro.2011.08.019 | en_US |
dc.identifier.issn |
0022-0248 | en_US |
dc.identifier.journal |
JOURNAL OF CRYSTAL GROWTH | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.jcrysgro.2011.08.019 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/150398 | |
dc.identifier.wosnumber |
WOS:000296269000015 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
X-ray diffraction | en_US |
dc.subject |
RF sputtering | en_US |
dc.subject |
Thin film/epitaxial growth | en_US |
dc.subject |
Ferroelectric materials | en_US |
dc.title |
Growth of BiFeO3/SrTiO3 artificial superlattice structure by RF sputtering | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chiu, S.-J., Liu, Y.-T., Lee, H.-Y., Yu, G.-P., & Huang, J.-H. (2011). Growth of BiFeO3/SrTiO3 artificial superlattice structure by RF sputtering. JOURNAL OF CRYSTAL GROWTH, 334, 90–95. https://doi.org/10.1016/j.jcrysgro.2011.08.019
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/150398