A Light Guide Plate That Uses Asymmetric Intensity Distribution of Mini-LEDs for the Planar Illuminator
Simple item page Statistics| Field | Value | Language |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.volume |
9 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Ye, Zhi-Ting | en_US |
dc.contributor.author |
Pai, Yung-Min | en_US |
dc.contributor.author |
Chen, Cheng-Huan | en_US |
dc.contributor.author |
Kuo, Hao-Chung | en_US |
dc.contributor.author |
Chen, Lung-Chien | en_US |
dc.contributor.department |
交大名義發表 | zh_TW |
dc.contributor.department |
National Chiao Tung University | en_US |
dc.date.accessioned |
2019-05-02T00:25:50Z | |
dc.date.available |
2019-05-02T00:25:50Z | |
dc.date.issued |
2019-03-08 | en_US |
dc.description.abstract |
Traditional backlights are designed with new dot patterns, and then injection molding, laser beam fabrication, or UV (Ultraviolet) roll-to-plate imprinting is used to apply dot patterns to a light guide plate-the process consumes considerable time and resources. Therefore, we propose a novel light guide design that does not use a dot pattern. We designed an asymmetric intensity distribution of mini-LEDs (Light Emitting Diode) and a light guide plate with a fully printed diffusion reflection on the bottom surface for a planar illuminator. The design rules for the proposed architecture are described in this paper. The archetype design with a 152.4 mm circular down-light has a diameter of 143 mm for the planar light source module. The experiment achieved a total efficiency of 85% and uniformity of 92.6%. | en_US |
dc.identifier.doi |
10.3390/cryst9030141 | en_US |
dc.identifier.issn |
2073-4352 | en_US |
dc.identifier.journal |
CRYSTALS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.3390/cryst9030141 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/151588 | |
dc.identifier.wosnumber |
WOS:000464477800001 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
planar illuminators | en_US |
dc.subject |
diffusion reflection | en_US |
dc.subject |
asymmetric | en_US |
dc.subject |
mini-LED | en_US |
dc.subject |
asymmetric intensity distribution | en_US |
dc.title |
A Light Guide Plate That Uses Asymmetric Intensity Distribution of Mini-LEDs for the Planar Illuminator | en_US |
dc.type |
Article | en_US |
Files
No files are attached to this item.
Collections: Articles
Cite this item
Ye, Z.-T., Pai, Y.-M., Chen, C.-H., Kuo, H.-C., & Chen, L.-C. (2019). A Light Guide Plate That Uses Asymmetric Intensity Distribution of Mini-LEDs for the Planar Illuminator. CRYSTALS, 9(3), 0. https://doi.org/10.3390/cryst9030141
Citation generated in APA 7th edition style; please check it before use.
Share
Permanent link: https://ir.lib.nycu.edu.tw/handle/11536/151588