A path-finding toward high-efficiency penternary Cu(In,Ga)(Se,S)(2) thin film solar module
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
847 | en_US |
dc.citation.spage |
837 | en_US |
dc.citation.volume |
179 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Huang, Chien-Yao | en_US |
dc.contributor.author |
Parashar, Parag | en_US |
dc.contributor.author |
Chou, Hao-Ming | en_US |
dc.contributor.author |
Lin, Yi-Shivan | en_US |
dc.contributor.author |
Lin, Albert | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2019-05-02T00:25:50Z | |
dc.date.available |
2019-05-02T00:25:50Z | |
dc.date.issued |
2019-01-01 | en_US |
dc.description.abstract |
The optimal p-n junction structure in a state-of-the-art Cu(In,Ga)(Se,S)(2) thin-film solar module technology is investigated. For co-optimization design and path-finding, a TCAD model is developed with experimental samples. The engineerable parameters, i.e., F-Ga, GGI(avg), and CdS thickness, are demonstrated to play a critical role in determining the p-n junction properties such as dark current characteristics J(dark)(V), voltage-dependent photocurrent, localized carrier collection efficiency, and interface carrier transportation. We show the optimal Ga-grading is determined by a trade-off between the recombination loss in space charge region and the photo carrier collection in quasi-neutral region. The optimal CdS thickness is determined by a trade-off between carrier collection efficiency, short-circuit current (J(SC)) loss, and J(dark)(V), which depends on varied Ga-profiles. Overall, thin CdS (<= 10 nm) is preferred to reduce the J(SC) loss in accumulated Ga-profiles, while thicker CdS is preferred to enhance the carrier collection efficiency in flatter Ga-profiles. The band alignment effect on varied Cu(In,Ga)(Se,S)(2)/CdS junctions is also investigated. It is found sulfur-incorporation can suppress the V-OC saturation behavior at wide bandgap. For CIGSeS absorber with SS = 20% and D-p = 15%, the maximum V-OC of 780 mV can be achieved by co-optimized Ga-profile. Furthermore, varied Ga-profiles and CdS buffer layers are explored for pathfinding. An optimal p-n junction structure shows a relative + 40% efficiency improvement from 15.5% to 21.9%. This work shows the efficiency headroom of reported CIGSeS thin-film solar module technology through co-optimized CIGSeS composition gradient and buffer layer. | en_US |
dc.identifier.doi |
10.1016/j.ijleo.2018.10.154 | en_US |
dc.identifier.issn |
0030-4026 | en_US |
dc.identifier.journal |
OPTIK | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.ijleo.2018.10.154 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/151591 | |
dc.identifier.wosnumber |
WOS:000464491400109 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
CIGSeS | en_US |
dc.subject |
Solar cell | en_US |
dc.subject |
Simulation | en_US |
dc.subject |
Path-finding | en_US |
dc.title |
A path-finding toward high-efficiency penternary Cu(In,Ga)(Se,S)(2) thin film solar module | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Huang, C.-Y., Parashar, P., Chou, H.-M., Lin, Y.-S., & Lin, A. (2019). A path-finding toward high-efficiency penternary Cu(In,Ga)(Se,S)(2) thin film solar module. OPTIK, 179, 837–847. https://doi.org/10.1016/j.ijleo.2018.10.154
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/151591