Correlation between SET-State Current Level and Read Disturb Failure Time in a Resistive Switching Memory
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Su, P. C. | en_US |
dc.contributor.author |
Jiang, C. M. | en_US |
dc.contributor.author |
Wang, C. W. | en_US |
dc.contributor.author |
Wang, Tahui | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2019-08-02T02:24:17Z | |
dc.date.available |
2019-08-02T02:24:17Z | |
dc.date.issued |
2018-01-01 | en_US |
dc.description.abstract |
The relationship between SET-state current level and read-disturb failure time in a tungsten oxide RRAM is characterized and modeled. Our result shows that read voltage induced reduction of oxygen vacancy density in tungsten oxide follows a power law dependence on cumulative read-disturb time. The power factor is independent of SET-state current level. Read disturb failure time is considerably improved by several orders of magnitude as SET-state current level increases a few times. An analytical model to correlate SET-state current level and read disturb failure time is proposed. Since SET-state current level is related to a cross-section of a conductive filament in an oxide, our model is developed based on a relationship between oxide area and critical oxide trap (oxygen vacancy) density from an oxide breakdown model. The validity of the proposed model is supported by experiment results. | en_US |
dc.identifier.isbn |
978-1-5386-5479-8 | en_US |
dc.identifier.issn |
1541-7026 | en_US |
dc.identifier.journal |
2018 IEEE INTERNATIONAL RELIABILITY PHYSICS SYMPOSIUM (IRPS) | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/152441 | |
dc.identifier.wosnumber |
WOS:000468959600135 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
RRAM | en_US |
dc.subject |
read-disturb failure | en_US |
dc.subject |
SET-state current level | en_US |
dc.subject |
model | en_US |
dc.title |
Correlation between SET-State Current Level and Read Disturb Failure Time in a Resistive Switching Memory | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Su, P. C., Jiang, C. M., Wang, C. W., & Wang, T. (2018). Correlation between SET-State Current Level and Read Disturb Failure Time in a Resistive Switching Memory. 2018 IEEE INTERNATIONAL RELIABILITY PHYSICS SYMPOSIUM (IRPS), 0. https://ir.lib.nycu.edu.tw/handle/11536/152441
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/152441