Surface Micro-/Nanotextured Hybrid PEDOT:PSS-Silicon Photovoltaic Cells Employing Kirigami Graphene
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
29909 | en_US |
dc.citation.issue |
33 | en_US |
dc.citation.spage |
29901 | en_US |
dc.citation.volume |
11 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Huang, Chi-Hsien | en_US |
dc.contributor.author |
Chen, Zih-Yang | en_US |
dc.contributor.author |
Chiu, Chi-Ling | en_US |
dc.contributor.author |
Huang, Tzu-Ting | en_US |
dc.contributor.author |
Meng, Hsin-Fei | en_US |
dc.contributor.author |
Yu, Peichen | en_US |
dc.contributor.department |
物理研究所 | zh_TW |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
Institute of Physics | en_US |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2019-10-05T00:08:42Z | |
dc.date.available |
2019-10-05T00:08:42Z | |
dc.date.issued |
2019-08-21 | en_US |
dc.description.abstract |
Kirigami graphene allows a two-dimensional material to transform into a three-dimensional structure, which constitutes an effective transparent electrode candidate for photovoltaic (PV) cells having a surface texture. The surface texture of an inverted pyramid was fabricated on a Si substrate using photolithography and wet etching, followed by metal-assisted chemical etching to obtain silicon nanowires on the surface of the inverted pyramid. Kirigami graphene with a cross-pattern array was prepared using photolithography and plasma etching on a copper foil. Then, kirigami graphene was transferred onto hybrid heterojunction PV cells with a poly(ethylene terephthalate)/silicone film. These cells consisted of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate)-(PEDOT:PSS) as the p-type semiconductor, Si(100) as the inorganic n-type semiconductor, and a silver comb electrode on top of PEDOT:PSS. The conductivity of PEDOT:PSS was greatly improved. This improvement was significantly higher than that achieved by the continuous graphene sheet without a pattern. Transmission electron microscopy and Raman spectroscopy results revealed that the greater improvement with kirigami graphene was due to the larger contact area between PEDOT:PSS and graphene. By using two-layer graphene having a kirigami pattern, the power conversion efficiency, under simulated AM1.5G illumination conditions, was significantly augmented by up to 9.8% (from 10.03 to 11.01%). | en_US |
dc.identifier.doi |
10.1021/acsami.9b08366 | en_US |
dc.identifier.issn |
1944-8244 | en_US |
dc.identifier.journal |
ACS APPLIED MATERIALS & INTERFACES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1021/acsami.9b08366 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/152821 | |
dc.identifier.wosnumber |
WOS:000482546000042 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
kirigami graphene | en_US |
dc.subject |
hybrid photovoltaic cell | en_US |
dc.subject |
PEDOT:PSS | en_US |
dc.subject |
surface texture | en_US |
dc.subject |
three-dimensional | en_US |
dc.title |
Surface Micro-/Nanotextured Hybrid PEDOT:PSS-Silicon Photovoltaic Cells Employing Kirigami Graphene | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Huang, C.-H., Chen, Z.-Y., Chiu, C.-L., Huang, T.-T., Meng, H.-F., & Yu, P. (2019). Surface Micro-/Nanotextured Hybrid PEDOT:PSS-Silicon Photovoltaic Cells Employing Kirigami Graphene. ACS APPLIED MATERIALS & INTERFACES, 11(33), 29901–29909. https://doi.org/10.1021/acsami.9b08366
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/152821