A Robust Fully-Integrated Digital-Output Inductive CMOS-MEMS Accelerometer with Improved Inductor Quality Factor
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.issue |
11 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.volume |
10 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Chiu, Yi | en_US |
dc.contributor.author |
Liu, Hsuan-Wu | en_US |
dc.contributor.author |
Hong, Hao-Chiao | en_US |
dc.contributor.department |
電機工程學系 | zh_TW |
dc.contributor.department |
Department of Electrical and Computer Engineering | en_US |
dc.date.accessioned |
2020-01-02T00:04:19Z | |
dc.date.available |
2020-01-02T00:04:19Z | |
dc.date.issued |
2019-11-01 | en_US |
dc.description.abstract |
This paper presents the design, fabrication, and characterization of an inductive complementary metal oxide semiconductor micro-electromechanical systems (CMOS-MEMS) accelerometer with on-chip digital output based on LC oscillators. While most MEMS accelerometers employ capacitive detection schemes, the proposed inductive detection scheme is less susceptible to the stress-induced structural curling and deformation that are commonly seen in CMOS-MEMS devices. Oscillator-based frequency readout does not need analog to digital conversion and thus can simplify the overall system design. In this paper, a high-Q CMOS inductor was connected in series with the low-Q MEMS sensing inductor to improve its quality factor. Measurement results showed the proposed device had an offset frequency of 85.5 MHz, sensitivity of 41.6 kHz/g, noise floor of 8.2 mg/root Hz, bias instability of 0.94 kHz (11 ppm) at an average time of 2.16 s, and nonlinearity of 1.5% full-scale. | en_US |
dc.identifier.doi |
10.3390/mi10110792 | en_US |
dc.identifier.journal |
MICROMACHINES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.3390/mi10110792 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/153371 | |
dc.identifier.wosnumber |
WOS:000502255300078 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
CMOS-MEMS | en_US |
dc.subject |
accelerometer | en_US |
dc.subject |
inductive | en_US |
dc.subject |
inductor | en_US |
dc.subject |
sprinductor | en_US |
dc.subject |
LC tank | en_US |
dc.subject |
oscillator | en_US |
dc.subject |
quality factor | en_US |
dc.subject |
digital output | en_US |
dc.title |
A Robust Fully-Integrated Digital-Output Inductive CMOS-MEMS Accelerometer with Improved Inductor Quality Factor | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chiu, Y., Liu, H.-W., & Hong, H.-C. (2019). A Robust Fully-Integrated Digital-Output Inductive CMOS-MEMS Accelerometer with Improved Inductor Quality Factor. MICROMACHINES, 10(11), 0. https://doi.org/10.3390/mi10110792
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153371