A 0.35-V 240-W Fast-Lock and Low-Phase-Noise Frequency Synthesizer for Implantable Biomedical Applications
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1770 | en_US |
dc.citation.issue |
6 | en_US |
dc.citation.spage |
1759 | en_US |
dc.citation.volume |
13 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Wang, Shih-Hsing | en_US |
dc.contributor.author |
Hung, Chung-Chih | en_US |
dc.contributor.department |
電機資訊學士班 | zh_TW |
dc.contributor.department |
Undergraduate Honors Program of Electrical Engineering and Computer Science | en_US |
dc.date.accessioned |
2020-02-02T23:54:35Z | |
dc.date.available |
2020-02-02T23:54:35Z | |
dc.date.issued |
2019-12-01 | en_US |
dc.description.abstract |
For implantable frequency synthesizers, realizing ultra-low voltage (ULV) and low power in addition to meeting PLL targets, fast lock and low phase noise, poses a difficult challenge. This paper presents techniques to achieve PLL targets as well as ULV and low power in the same chip through the use of a regular CMOS technology node. A curvature-PFD technique achieves both faster locking and lower jitter compared with conventional techniques. A two-step switching technique substantially reduces the power consumption in current mirrors and reduce noise when switching from a charge pump. Leakage analysis and subthreshold-leakage-reduction technique reduce reference spur and jitter to the voltage-controlled oscillator (VCO). A dither technique randomizes and averages reference spurs. The proposed chip was implemented in 90-nm CMOS technology; the 0.35-V medical-band frequency synthesizer consumes 238-W power while generating output clock of 401.8 to 431.31-MHz and exhibiting a phase noise of -105.7 dBc/Hz at 1-MHz frequency offset with 20 s locking time. | en_US |
dc.identifier.doi |
10.1109/TBCAS.2019.2941090 | en_US |
dc.identifier.issn |
1932-4545 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TBCAS.2019.2941090 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/153544 | |
dc.identifier.wosnumber |
WOS:000507321400060 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Frequency synthesizers | en_US |
dc.subject |
Phase locked loops | en_US |
dc.subject |
Jitter | en_US |
dc.subject |
Voltage-controlled oscillators | en_US |
dc.subject |
Phase noise | en_US |
dc.subject |
Bandwidth | en_US |
dc.subject |
Power demand | en_US |
dc.subject |
Implantable applications | en_US |
dc.subject |
low power | en_US |
dc.subject |
MedRadio | en_US |
dc.subject |
PLL | en_US |
dc.subject |
ultra-low-power electronics | en_US |
dc.subject |
ultra low voltage | en_US |
dc.title |
A 0.35-V 240-W Fast-Lock and Low-Phase-Noise Frequency Synthesizer for Implantable Biomedical Applications | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Wang, S.-H., & Hung, C.-C. (2019). A 0.35-V 240-W Fast-Lock and Low-Phase-Noise Frequency Synthesizer for Implantable Biomedical Applications. IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS, 13(6), 1759–1770. https://doi.org/10.1109/TBCAS.2019.2941090
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153544