Fuzzy approach for production planning by using a three-dimensional printing-based ubiquitous manufacturing system
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
468 | en_US |
dc.citation.issue |
4 | en_US |
dc.citation.spage |
458 | en_US |
dc.citation.volume |
33 | en_US |
dc.citation.woscount |
2 | en_US |
dc.contributor.author |
Chen, Tin-Chih Toly | en_US |
dc.contributor.department |
交大名義發表 | zh_TW |
dc.contributor.department |
National Chiao Tung University | en_US |
dc.date.accessioned |
2020-03-02T03:23:30Z | |
dc.date.available |
2020-03-02T03:23:30Z | |
dc.date.issued |
2019-11-01 | en_US |
dc.description.abstract |
A ubiquitous manufacturing (UM) system is used in manufacturing for obtaining the Internet of things solutions and provides location-based manufacturing services. Human-induced uncertainty and early termination are two complications that hamper the effectiveness of an UM system based on three-dimensional (3D) printing. To resolve these complications, several solutions were considered in this study. First, fuzzy-valued parameters were defined to determine uncertainty. Subsequently, slack was derived to determine whether to restart an early terminated 3D printing process in the same 3D printing facility. Consequently, two optimization models - a fuzzy mixed-integer linear programming model and a fuzzy mixed-integer quadratic programming model - were developed in this study. Based on the two optimization models, a fuzzy 3D printing-based UM system that considers uncertainty and early termination was developed. The effectiveness of the proposed methodology was tested by conducting a regional experiment. The experimental results revealed that the proposed methodology could shorten the average cycle time by 9% and could enable 3D printing facilities to make real-time, online reprinting decisions. | en_US |
dc.identifier.doi |
10.1017/S0890060419000222 | en_US |
dc.identifier.issn |
0890-0604 | en_US |
dc.identifier.journal |
AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1017/S0890060419000222 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/153775 | |
dc.identifier.wosnumber |
WOS:000509726900008 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Cycle time | en_US |
dc.subject |
fuzzy | en_US |
dc.subject |
slack | en_US |
dc.subject |
three-dimensional printing | en_US |
dc.subject |
ubiquitous manufacturing | en_US |
dc.title |
Fuzzy approach for production planning by using a three-dimensional printing-based ubiquitous manufacturing system | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chen, T.-C. T. (2019). Fuzzy approach for production planning by using a three-dimensional printing-based ubiquitous manufacturing system. AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING, 33(4), 458–468. https://doi.org/10.1017/S0890060419000222
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153775