A Wireless Gauge Pressure Sensor with Enhanced Sensitivity Fabricated by Flexible PCB Technology For Intracranial Pressure Sensing
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Chiu, Yi | en_US |
dc.contributor.author |
Chen, You-Zen | en_US |
dc.contributor.author |
Hsieh, Chia-Chun | en_US |
dc.contributor.author |
Hong, Hao-Chiao | en_US |
dc.contributor.department |
分子醫學與生物工程研究所 | zh_TW |
dc.contributor.department |
電機工程學系 | zh_TW |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Molecular Medicine and Bioengineering | en_US |
dc.contributor.department |
Department of Electrical and Computer Engineering | en_US |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2020-10-05T02:00:32Z | |
dc.date.available |
2020-10-05T02:00:32Z | |
dc.date.issued |
2019-01-01 | en_US |
dc.description.abstract |
This paper presents a gauge pressure sensor based on the standard industrial flexible PCB (FPCB) technology. The wireless LC-resonant sensor consists of a variable sensing capacitor and a planar inductor coil fabricated in FPCB. The air gap of the sensing capacitor is extended through a pressure channel embedded in the FPCB strip to enable relative pressure measurement. Thus, the intracranial pressure (ICP) with respect to local atmosphere can be measured without other calibration means. The flat FPCB structure also facilitates the subdural implantation procedures. Experimental results showed that the proposed gauge pressure sensors with such open sensing structures had much higher frequency sensitivity (0.29%/mmHg) compared with sensors with sealed sensing cavities (0.005%/mmHg) and achieved a resolution of 0.51 mmHg. | en_US |
dc.identifier.isbn |
978-1-7281-1634-1 | en_US |
dc.identifier.issn |
1930-0395 | en_US |
dc.identifier.journal |
2019 IEEE SENSORS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/155056 | |
dc.identifier.wosnumber |
WOS:000534184600435 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
intracranial pressure | en_US |
dc.subject |
ICP | en_US |
dc.subject |
pressure sensor | en_US |
dc.subject |
flexible PCB | en_US |
dc.subject |
FPCB | en_US |
dc.subject |
relative pressure | en_US |
dc.subject |
gauge pressure | en_US |
dc.subject |
LC resonance | en_US |
dc.subject |
frequency | en_US |
dc.title |
A Wireless Gauge Pressure Sensor with Enhanced Sensitivity Fabricated by Flexible PCB Technology For Intracranial Pressure Sensing | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Chiu, Y., Chen, Y.-Z., Hsieh, C.-C., & Hong, H.-C. (2019). A Wireless Gauge Pressure Sensor with Enhanced Sensitivity Fabricated by Flexible PCB Technology For Intracranial Pressure Sensing. 2019 IEEE SENSORS, 0. https://ir.lib.nycu.edu.tw/handle/11536/155056
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/155056