Using an Interval Type-2 Fuzzy Neural Network and Tool Chips for Flank Wear Prediction
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
122640 | en_US |
dc.citation.spage |
122626 | en_US |
dc.citation.volume |
8 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Lin, Cheng-Jian | en_US |
dc.contributor.author |
Jhang, Jyun-Yu | en_US |
dc.contributor.author |
Chen, Shao-Hsien | en_US |
dc.contributor.author |
Young, Kuu-Young | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2020-10-05T02:01:11Z | |
dc.date.available |
2020-10-05T02:01:11Z | |
dc.date.issued |
2020-01-01 | en_US |
dc.description.abstract |
The precision of part machining is influenced by the tool life. Tools gradually wear out during the cutting process, which reduces the machining accuracy. Many studies have used machining parameters and sensor signals to predict flank wear; however, these methods have many limitations related to sensor installation, which is not only time-consuming and costly but also impractical in industry. This paper proposes an interval type-2 fuzzy neural network (IT2FNN) based on the dynamic-group cooperative differential evolution algorithm for flank wear prediction. Moreover, the Taguchi method is used to design cutting experiments for collecting experimental data and reducing the number of experiments. The CIE-xy color chromaticity values, spindle speed, feed per tooth, cutting depth, and cutting time are used as inputs of the IT2FNN, and the output is the flank wear value. The experimental results indicate that the proposed method can effectively predict flank wear with higher efficiency than other algorithms. | en_US |
dc.identifier.doi |
10.1109/ACCESS.2020.3006849 | en_US |
dc.identifier.issn |
2169-3536 | en_US |
dc.identifier.journal |
IEEE ACCESS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/ACCESS.2020.3006849 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/155228 | |
dc.identifier.wosnumber |
WOS:000555545000001 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Flank wear | en_US |
dc.subject |
chip surface | en_US |
dc.subject |
color calibration | en_US |
dc.subject |
interval type-2 fuzzy neural network | en_US |
dc.subject |
differential evolution | en_US |
dc.title |
Using an Interval Type-2 Fuzzy Neural Network and Tool Chips for Flank Wear Prediction | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Lin, C.-J., Jhang, J.-Y., Chen, S.-H., & Young, K.-Y. (2020). Using an Interval Type-2 Fuzzy Neural Network and Tool Chips for Flank Wear Prediction. IEEE ACCESS, 8, 122626–122640. https://doi.org/10.1109/ACCESS.2020.3006849
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/155228