Implementation of Fault-Tolerant Control for Five-Level Double-Boost Power Factor Corrector Converter
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Chen, Hung-Chi | en_US |
dc.contributor.author |
Lopez, Jonathan Jose Vasquez | en_US |
dc.contributor.department |
電機工程學系 | zh_TW |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Department of Electrical and Computer Engineering | en_US |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2020-10-05T02:02:19Z | |
dc.date.available |
2020-10-05T02:02:19Z | |
dc.date.issued |
2019-01-01 | en_US |
dc.description.abstract |
The modular multilevel topology is the double-boost type. This topology can be implemented either in single-phase or three-phase implementation, as well as in interleaved connection. As all converters of its type, this converter provides high power quality in terms of power factor and total harmonic distortion. In addition, the topology provides redundant states that are used to balance the flying capacitors during normal operation and to implement a post-fault reconfiguration strategy to provide continues operation when the permanent-short circuit failures occurs. Two control strategies using phase-shifted carrier PWM and phase disposition PWM are presented. The characteristics of the converter topology and the control strategies are demonstrated through mathematical analysis and simulation. A mock-up of the converter was constructed to verify the feasibility of both control strategies and the post-fault reconfiguration strategy. | en_US |
dc.identifier.isbn |
978-1-7281-3153-5 | en_US |
dc.identifier.journal |
2019 IEEE 4TH INTERNATIONAL FUTURE ENERGY ELECTRONICS CONFERENCE (IFEEC) | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/155492 | |
dc.identifier.wosnumber |
WOS:000559757400131 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
AC-DC power converters | en_US |
dc.subject |
digital control | en_US |
dc.subject |
fault diagnosis | en_US |
dc.subject |
fault location | en_US |
dc.subject |
monitoring | en_US |
dc.subject |
pulse width modulation (PWM) | en_US |
dc.subject |
redundancy | en_US |
dc.subject |
robustness | en_US |
dc.title |
Implementation of Fault-Tolerant Control for Five-Level Double-Boost Power Factor Corrector Converter | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Chen, H.-C., & Lopez, J. J. V. (2019). Implementation of Fault-Tolerant Control for Five-Level Double-Boost Power Factor Corrector Converter. 2019 IEEE 4TH INTERNATIONAL FUTURE ENERGY ELECTRONICS CONFERENCE (IFEEC), 0. https://ir.lib.nycu.edu.tw/handle/11536/155492
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/155492