Eye-hand-workspace calibration using laser pointer projection on plane surface
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
197 | en_US |
dc.citation.issue |
2 | en_US |
dc.citation.volume |
39 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Hu, Jwu-Sheng | en_US |
dc.contributor.author |
Chang, Yung-Jung | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:23:02Z | |
dc.date.available |
2014-12-08T15:23:02Z | |
dc.date.issued |
2012 | en_US |
dc.description.abstract |
Purpose - The purpose of this paper is to propose a calibration method that can calibrate the relationships among the robot manipulator, the camera and the workspace. Design/methodology/approach - The method uses a laser pointer rigidly mounted on the manipulator and projects the laser beam on the work plane. Nonlinear constraints governing the relationships of the geometrical parameters and measurement data are derived. The uniqueness of the solution is guaranteed when the camera is calibrated in advance. As a result, a decoupled multi-stage closed-form solution. can be derived based on parallel line constraints, line/plane intersection and projective geometry. The closed-form solution can be further refined by nonlinear optimization which considers all parameters simultaneously in the nonlinear model. Findings - Computer simulations and experimental tests using actual data confirm the effectiveness of the proposed calibration method and illustrate its ability to work even when the eye cannot see the hand. Originality/value - Only a laser pointer is required for this calibration method and this method can work without any manual measurement. In addition, this method can also be applied when the robot is not within the camera field of view. | en_US |
dc.identifier.issn |
0143-991X | en_US |
dc.identifier.journal |
INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/16194 | |
dc.identifier.wosnumber |
WOS:000302527100011 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Robotics | en_US |
dc.subject |
Lasers | en_US |
dc.subject |
Calibration | en_US |
dc.subject |
Hand/eye calibration | en_US |
dc.subject |
Manipulator | en_US |
dc.subject |
Camera | en_US |
dc.subject |
Laser pointer | en_US |
dc.subject |
Closed-form solution | en_US |
dc.subject |
Optimization | en_US |
dc.title |
Eye-hand-workspace calibration using laser pointer projection on plane surface | en_US |
dc.type |
Article | en_US |
檔案
- 000302527100011.pdf (450.2 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Hu, J.-S., & Chang, Y.-J. (2012). Eye-hand-workspace calibration using laser pointer projection on plane surface. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 39(2). https://ir.lib.nycu.edu.tw/handle/11536/16194
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/16194