I/O clustering in design cost and performance optimization for flip-chip design
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
567 | en_US |
dc.citation.spage |
562 | en_US |
dc.contributor.author |
Chen, HM | en_US |
dc.contributor.author |
Liu, IM | en_US |
dc.contributor.author |
Wong, MDF | en_US |
dc.contributor.author |
Shao, MZ | en_US |
dc.contributor.author |
Huang, LD | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:25:42Z | |
dc.date.available |
2014-12-08T15:25:42Z | |
dc.date.issued |
2004 | en_US |
dc.description.abstract |
I/O placement has always been a concern in modern IC design. Due to flip-chip technology, I/O can be placed throughout the whole chip without long wires from the periphery of the chip. However, because of I/O placement constraints in design cost and performance, I/O buffer planning becomes a pressing problem. During the early stages of circuits and packaging co-design, I/O layout should be evaluated to optimize design cost and to avoid product failures. In this paper, our objective is to better an existing/initial standard cell placement by I/O clustering, considering design cost reduction and signal integrity preservation. We formulate it as a minimum cost flow problem minimizing alphaW + betaD, where W is the I/O wirelength of the placement and D is the total voltage drop in the power network. The experimental results on some MCNC benchmarks show that our method achieves better timing performance and averagely over 30% design cost reduction when compared with the conventional design rule of thumb popularly used by circuit designers. | en_US |
dc.identifier.isbn |
0-7695-2231-9 | en_US |
dc.identifier.issn |
1063-6404 | en_US |
dc.identifier.journal |
IEEE INTERNATIONAL CONFERENCE ON COMPUTER DESIGN: VLSI IN COMPUTERS & PROCESSORS, PROCEEDINGS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/18123 | |
dc.identifier.wosnumber |
WOS:000225189200091 | |
dc.language.iso |
en_US | en_US |
dc.title |
I/O clustering in design cost and performance optimization for flip-chip design | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Chen, H., Liu, I., Wong, M., Shao, M., & Huang, L. (2004). I/O clustering in design cost and performance optimization for flip-chip design. IEEE INTERNATIONAL CONFERENCE ON COMPUTER DESIGN: VLSI IN COMPUTERS & PROCESSORS, PROCEEDINGS, 562–567. https://ir.lib.nycu.edu.tw/handle/11536/18123
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/18123