Precision Control and Compensation of Servomotors and Machine Tools via the Disturbance Observer
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
429 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
420 | en_US |
dc.citation.volume |
57 | en_US |
dc.contributor.author |
Huang, Wei-Sheng | en_US |
dc.contributor.author |
Liu, Chun-Wei | en_US |
dc.contributor.author |
Hsu, Pau-Lo | en_US |
dc.contributor.author |
Yeh, Syh-Shiuh | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:26:24Z | |
dc.date.available |
2014-12-08T15:26:24Z | |
dc.date.issued |
2010-01-01 | en_US |
dc.description.abstract |
The computerized numerical control machine tool is a highly integrated mechatronic system in manufacturing processes. However, uncertainties degrade its motion accuracy. These include modeling errors, parameter variation, friction, and measurement errors that are present in either linear or nonlinear nature. In this paper, a state-space disturbance observer was successfully applied to servomotors to estimate and compensate for the uncertainties of parameter variation and current measurement problems, in the velocity and current loops, respectively. Furthermore, an autotuning procedure was developed accordingly to identify the varied parameters of the motor. Furthermore, by implementing the present servomotor systems in high-precision machine tools, the nonlinear friction compensation was adopted to reduce the slip-stick effect in contouring motion. Experimental results indicate that the roundness error has been significantly reduced from 13.3 to 2.0 mu m by applying the proposed approaches. | en_US |
dc.identifier.doi |
10.1109/TIE.2009.2034178 | en_US |
dc.identifier.issn |
0278-0046 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TIE.2009.2034178 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/18737 | |
dc.identifier.wosnumber |
WOS:000272723000048 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Contouring | en_US |
dc.subject |
disturbance | en_US |
dc.subject |
friction | en_US |
dc.subject |
identification | en_US |
dc.subject |
inertia | en_US |
dc.subject |
machine tool control | en_US |
dc.subject |
motion tool | en_US |
dc.subject |
observer | en_US |
dc.subject |
servomotor | en_US |
dc.subject |
viscous | en_US |
dc.title |
Precision Control and Compensation of Servomotors and Machine Tools via the Disturbance Observer | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
- 000272723000048.pdf (1.96 MB, Adobe PDF)
所屬典藏: 會議論文
引用此條目
Huang, W.-S., Liu, C.-W., Hsu, P.-L., & Yeh, S.-S. (2010). Precision Control and Compensation of Servomotors and Machine Tools via the Disturbance Observer. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 57(1), 420–429. https://doi.org/10.1109/TIE.2009.2034178
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/18737