Characteristics of low-temperature-prepared (Ba, Sr)TiO3 films post treated by novel excimer laser annealing
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
230 | en_US |
dc.citation.spage |
227 | en_US |
dc.contributor.author |
Shye, DC | en_US |
dc.contributor.author |
Chiou, BS | en_US |
dc.contributor.author |
Hwang, CC | en_US |
dc.contributor.author |
Chen, JS | en_US |
dc.contributor.author |
Su, IW | en_US |
dc.contributor.author |
Chou, CC | en_US |
dc.contributor.author |
Cheng, HC | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:26:34Z | |
dc.date.available |
2014-12-08T15:26:34Z | |
dc.date.issued |
2002 | en_US |
dc.description.abstract |
Thin (Ba0.5Sr0.5)TiO3 (BST) films were sputtered on Pt[FiN/Ti/Si multilayer substrates at very low temperature (150degrees C). A novel process, using wavelength 248-nm KrF excimer laser annealing (ELA), has been undertaken to implement barium strontium titanate (BST) films at a low process temperature of 300degrees C. The crystallinity and dielectric constant are greatly improved after ELA treatment. In this work, the variation of texture was investigated. Besides, the escaped oxygen atoms from BST films were detected in-situ using a residual gas analyzer (RGA) during ELA process. Thus, the degradation of upper surface is strongly influenced by the laser energy fluence for an ELA-BST film. | en_US |
dc.identifier.isbn |
0-7803-7414-2 | en_US |
dc.identifier.journal |
ISAF 2002: PROCEEDINGS OF THE 13TH IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/18857 | |
dc.identifier.wosnumber |
WOS:000183375500056 | |
dc.language.iso |
en_US | en_US |
dc.subject |
excimer laser annealing | en_US |
dc.subject |
low temperature | en_US |
dc.subject |
texture | en_US |
dc.subject |
residual gas analyzer (RGA) | en_US |
dc.title |
Characteristics of low-temperature-prepared (Ba, Sr)TiO3 films post treated by novel excimer laser annealing | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Shye, D., Chiou, B., Hwang, C., Chen, J., Su, I., Chou, C., & Cheng, H. (2002). Characteristics of low-temperature-prepared (Ba, Sr)TiO3 films post treated by novel excimer laser annealing. ISAF 2002: PROCEEDINGS OF THE 13TH IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS, 227–230. https://ir.lib.nycu.edu.tw/handle/11536/18857
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/18857