AIGaN Schottky characteristics after hybrid photo-enhanced wet and inductively coupled plasma etch
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
128 | en_US |
dc.citation.issue |
20 | en_US |
dc.citation.spage |
124 | en_US |
dc.citation.volume |
2001 | en_US |
dc.contributor.author |
Huang, WJ | en_US |
dc.contributor.author |
Fang, CY | en_US |
dc.contributor.author |
Wong, JS | en_US |
dc.contributor.author |
Lee, CS | en_US |
dc.contributor.author |
Chang, EY | en_US |
dc.contributor.author |
Feng, MS | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:26:54Z | |
dc.date.available |
2014-12-08T15:26:54Z | |
dc.date.issued |
2001 | en_US |
dc.description.abstract |
AlGaN Schottky contact characteristics after hybrid photo-enhanced wet etch and Inductively coupled plasma etch (ICP) is studied. AlGaN was grown by MOCVD on sapphire substrate. KOH solution and 100mW/cm(2) UV illumination by Hg are lamp was used for photo-enhanced wet etch. Gas mixture of Cl-2 and N-2 was used for ICP etch. The Schottky metal used in this study is Ni/Au (100nm/100nm) and the Ohmic metal used is Al (100nm). Typical etch rates are 0.28nm/min and 265nm/min with a roughness of 0.6nm and 1.17nm for wet and dry etch respectively. The ICP process etches more rapidly but the etched surfaces are rougher when compared to the wet-etch process. After ICP etch at 600 watt for 60sec, the schottky diode has an ideality factor n=2.6, and the barrier height phi(B)=0.65 eV However, for the ICP etched sample followed by photo-enhanced wet chemical etch for 30mins, the sample has an ideality factor n=0.99, and the barrier height phi(B)=0.86 eV, and the breakdown voltage is recovered from 4V to 7.5V The study indicates that the wet chemical etch can remove the damage caused by ICP etching. Overall, the hybrid dry/wet etch process is a high etch rate process and cause very low damages on the etched surface. | en_US |
dc.identifier.isbn |
1-56677-353-9 | en_US |
dc.identifier.journal |
STATE-OF-THE-ART PROGRAM ON COMPOUND SEMICONDUCTORS (SOTAPOCS XXXV) | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/19127 | |
dc.identifier.wosnumber |
WOS:000180622600017 | |
dc.language.iso |
en_US | en_US |
dc.subject |
AlGaN | en_US |
dc.subject |
Schottky | en_US |
dc.subject |
barrier height | en_US |
dc.subject |
ideality factor | en_US |
dc.subject |
breakdown-voltage | en_US |
dc.title |
AIGaN Schottky characteristics after hybrid photo-enhanced wet and inductively coupled plasma etch | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Huang, W., Fang, C., Wong, J., Lee, C., Chang, E., & Feng, M. (2001). AIGaN Schottky characteristics after hybrid photo-enhanced wet and inductively coupled plasma etch. STATE-OF-THE-ART PROGRAM ON COMPOUND SEMICONDUCTORS (SOTAPOCS XXXV), 2001(20), 124–128. https://ir.lib.nycu.edu.tw/handle/11536/19127
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/19127