Anodic TiO2 Nanotube Arrays for Dye-Sensitized Solar Cells Characterized by Electrochemical Impedance Spectroscopy
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
6266 | en_US |
dc.citation.issue |
8 | en_US |
dc.citation.spage |
6253 | en_US |
dc.citation.volume |
38 | en_US |
dc.citation.woscount |
8 | |
dc.contributor.author |
Wu, Hui Ping | en_US |
dc.contributor.author |
Li, Lu Lin | en_US |
dc.contributor.author |
Chen, Chien Chon | en_US |
dc.contributor.author |
Diau, Eric Wei Guang | en_US |
dc.contributor.department |
土木工程學系 | zh_TW |
dc.contributor.department |
應用化學系 | zh_TW |
dc.contributor.department |
Department of Civil Engineering | en_US |
dc.contributor.department |
Department of Applied Chemistry | en_US |
dc.date.accessioned |
2014-12-08T15:28:10Z | |
dc.date.available |
2014-12-08T15:28:10Z | |
dc.date.issued |
2012-12-01 | en_US |
dc.description.abstract |
This paper reports on the microstructure of anodic titanium oxide (TiO2) and its use in a dye-sensitized solar cell (DSSC) device. When voltages of 60 V were applied to titanium foil for 2 hr under 0.25 wt% NH4F + 2 vol% H2O+C2H4(OH)(2), TiO2 with a nanotube structure was formed. The film, which had a large surface area, was used as an electron transport film in the DSSC. The DSSC device had a short-circuit current density (J(sc)) of 12.52 mA cm(-2), a fill factor (FF) of 0.65, an open-voltage (V-oc) of 0.77 V, and a photocurrent efficiency of 6.3% under 100% AM 1.5 light. The internal impedance values under 100%, 64%, 11%, and 0% (dark) AM 1.5 light intensities were measured and simulated using the electrical impedance spectroscopy (EIS) technique. The impedance characteristics of the DSSC device were simulated using inductors, resistors, and capacitors. The Ti/TiO2, TiO2/Electrolyte, electrolyte, and electrolyte/ (Pt/ITO) interfaces were simulated using an RC parallel circuit, and the bulk materials, such as the Ti, ITO and conducting wire, were simulated using a series of resistors and inductors. The impedance of the bulk materials was simulated using L-0+R-0+R-b, the impedance of the working electrode was simulated using (C-1//R-1)//(R-a+(C-2//R-2), the electrolyte was simulated using C-3//R-3, and the counter electrode was simulated using C-4//R-4. (C) 2012 Elsevier Ltd and Techna Group Sri. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.ceramint.2012.04.079 | en_US |
dc.identifier.issn |
0272-8842 | en_US |
dc.identifier.journal |
CERAMICS INTERNATIONAL | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.ceramint.2012.04.079 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/20390 | |
dc.identifier.wosnumber |
WOS:000309645000023 | |
dc.language.iso |
en_US | en_US |
dc.subject |
DSSC | en_US |
dc.subject |
Anodic | en_US |
dc.subject |
TiO2 | en_US |
dc.subject |
Efficiency | en_US |
dc.title |
Anodic TiO2 Nanotube Arrays for Dye-Sensitized Solar Cells Characterized by Electrochemical Impedance Spectroscopy | en_US |
dc.type |
Article | en_US |
檔案
- 000309645000023.pdf (2.64 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Wu, H. P., Li, L. L., Chen, C. C., & Diau, E. W. G. (2012). Anodic TiO2 Nanotube Arrays for Dye-Sensitized Solar Cells Characterized by Electrochemical Impedance Spectroscopy. CERAMICS INTERNATIONAL, 38(8), 6253–6266. https://doi.org/10.1016/j.ceramint.2012.04.079
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/20390