An automatic optical inspection system for measuring a microlens array with an optical interferometric microscope and genetic algorithm
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
67 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
57 | en_US |
dc.citation.volume |
33 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Yang, Shih-Wei | en_US |
dc.contributor.author |
Lin, Chern-Sheng | en_US |
dc.contributor.author |
Lin, Shir-Kuan | en_US |
dc.contributor.author |
Fu, Shu-Hsien | en_US |
dc.contributor.author |
Yeh, Mau-Shiun | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:29:56Z | |
dc.date.available |
2014-12-08T15:29:56Z | |
dc.date.issued |
2013 | en_US |
dc.description.abstract |
Purpose - The purpose of this paper is to propose an automatic optical inspection system for measuring the surface profile of a microlens array. Design/methodology/approach - The system set-up was constructed according to the principle of the Fizeau interferometer. After capturing the ring interference fringe images of the microlens with a camera, the diameter, profile information and optical properties were analyzed through a microlens surface profile algorithm using innovative image pre-processing with a precision of less than 0.09 micron. Findings - By integrating with the genetic algorithm, the XY-Table shortest moving path of the system is calculated to achieve the purpose of highspeed inspection and automatic microlens array surface profile measurement. Originality/value - The measurement results of this system were also compared with other systems, including the atomic force microscope and stylus profiler, to verify the measurement precision and accuracy of this system. | en_US |
dc.identifier.doi |
10.1108/01445151311294720 | en_US |
dc.identifier.issn |
0144-5154 | en_US |
dc.identifier.journal |
ASSEMBLY AUTOMATION | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1108/01445151311294720 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/21469 | |
dc.identifier.wosnumber |
WOS:000316240000006 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Inspection | en_US |
dc.subject |
Automation | en_US |
dc.subject |
Genetic algorithms | en_US |
dc.subject |
Surface properties of materials | en_US |
dc.subject |
Automatic optical inspection system | en_US |
dc.subject |
Microlens array | en_US |
dc.subject |
Surface profile | en_US |
dc.title |
An automatic optical inspection system for measuring a microlens array with an optical interferometric microscope and genetic algorithm | en_US |
dc.type |
Article | en_US |
檔案
- 000316240000006.pdf (401.4 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Yang, S.-W., Lin, C.-S., Lin, S.-K., Fu, S.-H., & Yeh, M.-S. (2013). An automatic optical inspection system for measuring a microlens array with an optical interferometric microscope and genetic algorithm. ASSEMBLY AUTOMATION, 33(1), 57–67. https://doi.org/10.1108/01445151311294720
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/21469